Click image to view original image
JOEO professional Walk In ess chamber controlled environmental chambers temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limit, so as to generate thermal stress and strain in the product.If you need more models about our test equipment, please reference our chamber-testing（.）com
Feature
Walk In ess Chamber simulate rapid temperature transition rates for faster product temperature changes based on your testing requirements – testing your products and yielding defects faster. feature enhanced air flow with larger compressors for change rates to 15C/min and higher. JOEO climatic test chamber support reach in, walk in, drive in and custom fast change rate test chambers that are designed for your specific
Can set the temperature variable rate of the different stress screening
Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
Meet requirements of stress screening test（ESS Test） for electronic equipment
Test methods:Switching temperature & average temperature
Support variety of stress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions
Meet Standards for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
Have 2 test methods:
①temperature test
②average temperature test
With aluminum sheet test machine load capacity (non plastic load)
Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
Following sample load customized with a large ESS Chamber
Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
Complete real-time test curve analysis shows that no time limit
Can be integrated with the E management system to monitor the management system
Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
Meet standards
IEC 60068-2-14 Nc - Rapid change of temperature, two-fluid-bath method
MIL-STD-883J Method 1011.9 - Military standard, test methods for microcircuits Thermal Shock
MIL-STD-202 Method 107 - Military standard, test methods for electronic and electrical component parts Thermal Shock
JESD22-A106B - Thermal Shock
IEC 60749-11 - Semiconductor devices, Mechanical and climatic test methods Part 11: Rapid change of temperature, Two-fluid-bath method
EIAJ ED-4701/307 - Environmental and endurance test methods for semiconductor devices Thermal Shock
Accessories:
Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
25L water storage tank 1 PCS
Pure water filter 1 PCS
