Click image to view original image
DM800se-S Dreambox 800 se hd pvr Digital Satellite Receiver:
1.400MHz MIPS processor
2.SIM:2.10
3.Bootloader 82, 300m wifi
4.Gemini:5.10
5.With 6cm quiet fan and HDMI connector
Features:
- 400 MHz MIPS Processor
- Enigma 2, Linux Operating System,Supports the Linux TV API
- colored OLED - Display
- MPEG-2 / H.264 Hardware decoding
- Tuner: BCM4505 dvb-s Tuner
- Tuner Module, Plug&Play
- 2 x Smartcard-Reader (Dreamcrypt CA)
- Mini USB for Service and software update
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- HDMI Connector
- 3 x USB 2.0 (e.g keyboard) one in front panel
- mini flash button
- analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 64 MByte Flash, 256 MByte RAM
- SATA
- for internal HDD 2,5“ - unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder
- extern 12V power supply
- Learning remote control
- WIFI, 300M WLAN supported
DVB 800 HD se technical data
DBS-Tuner mit DVB-S2:
DBS-Tuner mit DVB-S2:
- Frequency Range 950 .... 2150 MHz
- Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
- Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
- DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)
Video decoder:
- Video Compression MPEG-2 and MPEG-1 compatible, H.264
- Video Formats 4:3 / 16:9
- Letterbox for 4:3 TV-Device
Audio decoder:
- Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
- Audio Mode Dual (main/sub), Stereo
- Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
- Output Level L/R 0,5 Vss on 600 Ohm
- THD > 60 dB (1 kHz)
- Crosstalk < -65 dB
Output digital:
- Output Level 0,5 Vss on 75 Ohm
- Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
- S/PDIF-Output optical, Toslink
Ausgang Video:
- Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
TV-Scart:
- Output: FBAS, RGB, S-Video
Mini USB service connector:
- Function: update of Firmware
Ethernet:
- 10/100 MBit compatible interface
- Function: update of Firmware
SATA Interface:
- for internal 2,5" HDD
USB
- 3 x USB 2.0
LNB power and polarisation per tuner:
- LNB Current 500mA max.; short-circuit-protected
- LNB Voltage vertical < 14V no load, > 11,5V at 400mA
- LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:
- DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
Power consumption:
- < 15W at 12V
External PSU
- Input:
110-240V AC / 50-60Hz / 0,6A - Output:
12V = / 3,0A
Physical specification:
- Ambient Temperature +15°C...+35°C
- Humidity < 80%
- Size (W x D x H): 225 mm x 145 mm x 52 mm
- Weight: 940 g without HDD