Click image to view original image
Cold-rolled Two Sides Ribbed Steel Bars Production Line
The technical parameter：
Maximum wire diameter is 12mm. The rolling specification is 5.5 to 10.5 (the specification of end product.) The rolling speed is 1.6-3m/s. Finally length is 3000-12000mm. Total capacity is 90kw (cold-rolled system) plus 600kw (induction furnace) and plus 5kw (cut off with very fast scissors)
The product feather:
A. The feathers of heat treatment equipment of cold-rolled ribbed belt steel bars:
Garden ordinary steel bars achieve to the size and mechanical feather of HRB400 (new steel of III grated) through cold-rolled. It makes cold-rolled ribbed steel bars elongation greatly increased, extends the scope of use cold-rolled ribbed steel bars.
B.BY-1
1. The product line uses the most advanced frequency conversion servo and self-development full frequency conversion control technology, effective protections the power transmission system and equipment from damage. It can extend the machinery life greatest. Can save electricity 30-40%, the line speed can up to 90-180 meter/second, improve production efficiency above 40%.
2. Our company products reducer uses self-development reducer, simplifying the structure of production line, makes the equipment more reasonable and compact. (Has omitted the speed reducer which between the main rolling mill and the main speed reducer. Reducing many different heart problems that the transmission distance has been long and the attachment flange not in concentric.)
Effectively improve the transmission efficiency more than 30%, increased the stability of the equipment by 60% or more. Effectively improve the production efficiency.
3. This equipment uses touch screen PLC numerical control system, make the operation easier, CNC higher degree.
4. This equipment is equipped with ultra-audio frequency induction heating system, using spiral induction heating principle, so that steel heated evenly, machine direction stability, and a blue protective layer formed on the surface to make steel from rust and rot.
5. Straightening machine with several rounds of synchronous control technique. Straightening effect is good. Less damage to the steel bars.
6. Cut off frequency or the use of self-developed servo-flying shear control system, easy to operate. The degree of NC is high. The failure rate is low, cut off the little error.
7. The equipment includes: (1) 5 Phosphorus machine, one Taiwan; (2) lubrication of machine, one Taiwan; (3) K2-reducing rolling mill, one Taiwan; (4) K3 positioning auxiliary rolling mill, one Taiwan; (5) K1 main rolling mill, one Taiwan (90kilowatt frequency control motor speed 120-180meter/second, adjustment method: electric adjustment); (6) lead pipe; (7) active multi-plane rotation of a straight sets; (8) servo control system using advanced cutting machine, one Taiwan; (9) leak the news rack 12 meters; (10) near the switchframe 1; (11) CNC operation cabinet, one Taiwan; (12) motor rails.
8. Note: This production line part of the equipment on the optional configured which decides to the contract and the packing list shall prevail.
6. Cut off frequency or the use of self-developed servo-flying shear control system, easy to operate. The degree of NC is high. The failure rate is low, cut off the little error.
7. The equipment includes: (1) 5 Phosphorus machine, one Taiwan; (2) lubrication of machine, one Taiwan; (3) K2-reducing rolling mill, one Taiwan; (4) K3 positioning auxiliary rolling mill, one Taiwan; (5) K1 main rolling mill, one Taiwan (90kilowatt frequency control motor speed 120-180meter/second, adjustment method: electric adjustment); (6) lead pipe; (7) active multi-plane rotation of a straight sets; (8) servo control system using advanced cutting machine, one Taiwan; (9) leak the news rack 12 meters; (10) near the switch
8. Note: This production line part of the equipment on the optional configured which decides to the contract and the packing list shall prevail.
