Click image to view original image
Following are the specifications, pls check .
1. The battery tester is according to the international standard design,
each channel of the battery tester has an independent constant-current source
and constant-voltage source. It is used to test car battery, auto battery as(
Ni-MH battery, Ni-CD battery, Lithium-ion battery and polymer batter, etc. )
2. The battery tester internal electrical power supply of battery tester uses
the high efficiency switching power supply, the energy conservation effect is
remarkable, each power tube has the independent protection circuit, guarantees
the battery load tester works with safety and reliability.
3. The battery tester adopts four wire method, decrease contact error, increase
measure precision.
4. Each channel is independent With high efficient cooling system, battery
tester can work 24 hours with full load.
5. Hardware adopts double loop control, that battery tester can change from
constant current to constant voltage without pinnacle, protect battery.
|
Input power
|
AC 380 V ±10% / 50 Hz
|
|
Equipment Input power
|
5KW
|
|
Voltage measurement Range
|
Charge: 0~5V; Discharge: 2.5~5V
|
|
Input Resistance
|
≥1MΩ
|
|
Current Output Range
|
±1000A
|
|
Current measurement Accuracy
|
±(0.1% of reading + 0.1% of range)
|
|
Voltage measurement Accuracy
|
±(0.1% of reading + 0.05% of range)
|
|
Time Accuracy
|
≤±0.05%
|
|
Data Record Condition
|
Δt:(1~60000S) ΔV:(3.0mV - 50V) ΔI:(3.6mA-60A)
|
|
Charge Mode
|
constant-current constant voltage
|
|
Discharge Mode
|
constant-current constant voltage
|
|
Cooling Method
|
air-cooled
|
|
volume
|
36U,1790*606.5*606(mm)
|
