Fume Hood Ceiling

Fume hood ceiling are designed considering most efficient air flow to the suction. These equipments are supplied in double skin arrangement with inner lining that is made of non corrosive heat resistant plastic and the outer skin is made out of power coated CRC.
 

Fume hood ceiling are developed and designed to be used as semi conductor ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire which may lead to emission of inflammable gases during the course of experiments. Hence, the materials of fume hoods are carefully chosen between industrial grades fire resistant commercial wooden boards covered with laminated sheets and lined completely with epoxy coating/FRP lining or corrosion resistant steel sheets having epoxy coating from inside, duly painted with attractive stove enamel/drying spray paint.

The work table is made of heavy gauge construction material fortified with acid proof glazed tiles/stainless steel grade ss-304 grade. The work bench is provided with a small made of stainless steel ss-304 grade. All fume hoods are provided with sliding sash made of special grade shatter proof glass duly framed in wooden/ aluminum frame with sliding motion and counter weight balanced mechanism.

Volume of exhaust

It is generally known that fume hoods are capable of maintaining a constant exhaust volume.

Testing procedures of contaminants

Fume hoods ceiling are specifically to decrease the loss of static pressure at a given baffle opening position. According to the standard procedures the average loss of static pressure at any given four points at ninety degree and 3 duct dia from the fume hood, that will not exceed 75 feet per minute at 0.25 inch, with full slash opening and face velocity of 100 feet per minute.

Noise and sound levels

Our fume hood ceilings are designed with lower noise levels and the performance of these fume hoods are comparatively better than the industry standards of 60db, and approximately 15cm distance from the sash.

Illumination levels at work space

Our fume hoods ceiling make sure that a maximum of 800 lux light is available on the work table through diffuser fluorescent light arrangement.

Exhaust assembly

These fume hoods ceiling are incorporated with an extremely durable and strong exhaust system that generally persists a range of 500-1250 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves.

Exhaust ducting

These fume hood ceiling are also integrated with a FRP ducting of required dimension as per the requirements of the user.

Features

• Reliable durable
• Energy efficient
• Ventilation across the cabinet
• Transparent doors for clear view 

Technical Matrix