Click image to view original image
Main features:
ο Handheld、lightweight and convenience for carrying
ο 45dB high dynamic range
ο ≤1m extra-short event dead zone
ο 0.05m high distance resolution,128k sampling points
ο Fast auto measurement,one-button operating
ο Handheld、lightweight and convenience for carrying
ο 45dB high dynamic range
ο ≤1m extra-short event dead zone
ο 0.05m high distance resolution,128k sampling points
ο Fast auto measurement,one-button operating
ο Communication light check automatically
ο Remote function via Ethernet
ο Double USB interfaces, supporting USB stick and printer and direct cable download to PC via ActiveSync
ο Supporting Bellcore GR196 file format in writing or reading
ο Built-in lithium battery with high capacity for over 8 hours of operating life
ο Remote function via Ethernet
ο Double USB interfaces, supporting USB stick and printer and direct cable download to PC via ActiveSync
ο Supporting Bellcore GR196 file format in writing or reading
ο Built-in lithium battery with high capacity for over 8 hours of operating life
ο Universal FC/PC,FC/SC,FC/ST connector type, it's convenient for surface cleaning
ο Unique function of updating application software on-line, returning to factory is unnecessary
|
Dynamic range
|
1310nm:39dB 1550nm:37dB 1625nm:37dB (build-in filter)
|
|
Distance uncertainty
|
±(0.75m + sample space + measurement distance×0.003%)1
|
|
Sampling resolution
|
0.05,0.1,0.2,0.5,1,2,4,8,16m
|
|
Distance range
|
0.4,0.8,1.6,3.2,6.4,16,32,64,128,256,512km(SMF);
|
|
Pulse width
|
5,10,30,80,160,320,640,1280,5120,10240,20480ns
|
|
Loss threshold
|
0.01dB
|
|
Sampling points
|
Up to 128k
|
|
0.05dB/dB
|
|
|
Loss resolution
|
0.001dB
|
|
Memory capacity
|
≥800traces(build-in), ≥65500traces(2GB SD storage)
|
|
Group refractive index setting
|
1.00000 to 2.00000 (0.00001steps)
|
|
Distance unit
|
km,m,kft,ft
|
|
Display
|
640×480, 6.5 inch TFT-LCD (touch screen)
|
|
Interface
|
USB, Min-USB, Ethernet, earphone, SD
|
|
VFL
|
650nm±10nm,2mW(typical);CW/1Hz
|
|
Optical Power Meter
|
Wavelength range: 1270nm to 1700nm Measurement range: -60 to +3dBm Measurement accuracy: 5% ( -10dBm, CW)
|
|
Power supply
|
AC adapter 100 to 240V, 50/60Hz, 1.5A DC:19V±2V(2A) Built-in Lithium battery: 4400mAh, operating time ≥8 hours 2
|
|
Language
|
User selectable: simplified Chinese, English, Russian, Korean etc..
|
|
Environment
|
Operating temperature: -10 to 50℃(charging:5 to 40℃)
Storage temperature: -40 to 70℃(Battery: -20 to 60℃) Relative humidity: 5% to 95%, non-condensing |
|
Dimensions
|
295×186×75(mm)
|
|
Weight
|
2.5kg Approx.
|
Extra-short event dead zone
Due to its high resolution,JX8002-3103 OTDR has 1m extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.
Due to its high resolution,JX8002-3103 OTDR has 1m extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.
JX8002 -3103 can quickly determine and locate the events and faults in trace precisely, then lists all events in even table, so it's very useful to maintainers to improving efficiency and it's unnecessary to know about the relative background knowledge.
High-speed auto measurement
The function of auto measurement of JX8002-3103 OTDR makes it unnecessary to operator to knowabout the further details of operating. The operation becomes very simple: after connect the fiber, only press【Start】,then the trace measured is displayed and the events are listed on screen in a few seconds, now, you can view the trace and event table.
The function of auto measurement of JX8002-3103 OTDR makes it unnecessary to operator to know
JX8002-3103 is ideal for access and FTTH network testing, it enable you to test through 1x32 even 1x64 splitters for PON(passive optical network) testing.
JX8002 -3103 offers an exceptional 1m event dead zone and 0.05m high distance resolution, with which you can characterize all events between the transmitter and the central office's fiber distribution panel.
Convenient VFL function
he built-in 650nm visual fault locator (VFL) is ideal for identifying bad splice, bad connector, break or macro bend easily. The standard VFL with more than 2 milliwatt output power is factory installed in JX8002-3103 , which the operation distance is in excess of 5 kilometers.
Communication Light Check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, JX8002 -3103-3103
he built-in 650nm visual fault locator (VFL) is ideal for identifying bad splice, bad connector, break or macro bend easily. The standard VFL with more than 2 milliwatt output power is factory installed in JX8002-3103 , which the operation distance is in excess of 5 kilometers.
Communication Light Check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, JX8002 -3103-3103
Multiple Wavelengths and Models
JX8002-3103 OTDR can provide any of single mode or multimode or both, designed to test FUT at up to four wavelengths in single unit, such as 850, 1300, 1310, 1383, 1490, 1550, 1625 and 1650nm wavelengths, with which JX8002 -3103
Abundant external interface
has abundant external interface, such as USB, Min-USB, Ethernet, earphone and SD, due to these, it can provide the following functions:
ο Training via multimedia for operators, which can enable you become a measuring expert within short time.
ο Implementing remote controlling through Ethernet, troubleshooting from long distance for fiber under test.
ο Printing trace and event table JX8002-3103 ο Updating application software on-line
JX8002-3103 OTDR can provide any of single mode or multimode or both, designed to test FUT at up to four wavelengths in single unit, such as 850, 1300, 1310, 1383, 1490, 1550, 1625 and 1650nm wavelengths, with which JX8002 -3103
Abundant external interface
has abundant external interface, such as USB, Min-USB, Ethernet, earphone and SD, due to these, it can provide the following functions:
ο Training via multimedia for operators, which can enable you become a measuring expert within short time.
ο Implementing remote controlling through Ethernet, troubleshooting from long distance for fiber under test.
ο Printing trace and event table JX8002-3103 ο Updating application software on-line
Typical application:
JX8002-3103 OTDR is mainly used to measure FTTx network, it provides multifunctions in one unit. JX8002-3103 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.
Real-time mode:The dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of fiber being spliced or connected.
Average measurement mode:The noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore，the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: the optimized measurement conditions are set automatically, it's unnecessary to operator to knowabout the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.
Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.
Real-time mode:The dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of fiber being spliced or connected.
Average measurement mode:The noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore，the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: the optimized measurement conditions are set automatically, it's unnecessary to operator to know
Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
Note1: Does not include uncertainty due to fiber index
Note2: Low brightness, exclude measuring.
Standard accessories
|
NO.
|
Name
|
quantity
|
|
1
|
Power line
|
1
|
|
2
|
AC/DC adapter
|
1
|
|
3
|
Quality certification
|
1
|
|
4
|
User manual
|
1
|
|
5
|
Trace analyzing software(CD)
|
1
|
|
6
|
Hard Carrying case(Including gallus)
|
1
|
|
7
|
Special gallus of instrument
|
1
|
Note: the standard OTDR interface type is FC/UPC,type of FC/APC is optional.
