Click image to view original image
Model: VTB-02
Operation step
1. Connect the output of power line with charger, and connect the another
end of power line plug into “OUT” interface .It shows normal charging
status as the light flashes green.
2. After recharging or fail to connect with the charger, the light will stops
2. After recharging or fail to connect with the charger, the light will stops
winking.30%, 70%, 100% three lights will respectively show the different
charging amount of electricity.
3. As the light flashes blue, which shows the electric quantity of charger is
3. As the light flashes blue, which shows the electric quantity of charger is
low and should charge charger in time.
4. The “IN” port is to charge this charger; the light will flash red amid
4. The “IN” port is to charge this charger; the light will flash red amid
charging. After charging, the red light will stop winking.
5. This charger is able to charge all kinds of mobile phone.
Specification
Charging voltage: 5V.
Charging Current: 500 mA(Max)
Output Voltage of the charger: 5V and 5.6 V, the charger is able
Charging voltage: 5V.
Charging Current: 500 mA(Max)
Output Voltage of the charger: 5V and 5.6 V, the charger is able
to detect it automatically
Output Current of the charger: 500 mA( MAX)
Capacity: 3000 mAh
Output Current of the charger: 500 mA( MAX)
Capacity: 3000 mAh
