Road marking paint is heated in a thermal preheater

DY-BAAM Driving Type Air Spray Cold Paint Road Marking Machine

When the road marking paint is heated in a thermal preheater, to control the heating temperature. To avoid marking paint deterioration, to prevent over-heating, and long-term high-temperature heating. Otherwise, the road marking paint in the thermal preheater will become waste. If you use the warming over marking paint, the marking will become yellow and come off easily. Should use the appropriate temperature, short time heating the paint. Usually the heating temperature of the paint melted within the range of 170 to 220 degrees Celsius, while heating, with stirring. First melting good paint for detection. Use a small amount of paint, coat into a sheet, and control the thickness of about 1.5mm. after natural cooling and molding, bent the sheet with fingers, can reach about 35 degrees when fracture. That the coating is heated the temperature and time is more appropriate, can be used for construction. If construction need to wait, turn off the preheater to cool again, road marking, re-ignition heating. At the same time, we must avoid prolonged heating at the right temperature.
Dayu road marking equipment company is a leading traffic marking equipment supplier in China. Dayu traffic marking machine include many different models, such as two-component road marking machine, road marking pre-heater , road marking remover, hand-push pre-marker etc. Zhengzhou Dayu also manufacture marking materials, dayu road marking materials include dayu thermoplastic road marking paint, dayu two-component road marking paint, etc. Double click this or the following urls: http://www.dyroad.com/cold-paint-road-marking-machine/dy-baam-driving-type-air-spray-cold-paint-road-marking-machine.html, www.dyroad.com/products.html, www.dyroad.com/photos.html, www.dyroad.com/catalog.html, www.dyroad.com to get more information.