Click image to view original image
products de
1, mobile phone wall holder ,designed for protecting displayed articles.
2. mobile phone wall holder ,widely used for security & alarm for diversified small electronic displayed articles or consumer electronic articles in IT retail stores and supermarkets.
3.small and easy to fix.
4.The probes build-in the host and the round sensor are pressed down when you paste them.
5.Then press the button in the host to on ,the system is working.
Basic data:
|
Operating Voltage |
3V |
|
Bi Tone Output |
88±5dB at 1 ft |
|
Stand-by Current Consumption |
1.0uA (Typical) |
|
Activation Current Consumption |
28mA (Typical) |
|
Alarm modes |
sound and light alarm |
|
Stand-by Battery Life |
Over 1 year |
|
Tone |
Bi Tone |
|
Host size |
4x1.5 x1.5 Cm |
|
Cord length |
|
|
Wire diameter |
0.2CM |
|
Color |
Black/White |
Use Method:
1.Tear off the 3M adhesive cover on the host and the round sensor.
2. Paste the probes and host on the commodities and counter respectively.
3.Set the button inside the host to ON that means the system is in the surveiling status.
4.If someone cuts or removes the system, the host will give a sound-light alarm.
5.Set the button to OFF, the host will stop surveiling.
