CZ-1002C Constant Temperature Testing Machine For LED Product Testing

This series of high temperature test chamber is common type test equipment in all kinds of aging test, they are applied to electronic device, materials, electrician, vehicle, metal, electronic products, all kinds of electrical parts under the condition of temperature environment to test their performance index and for quality control.

Description

Constant High Temperature Test Chamber

Model

CZ-1002C

Specimen limitation

1)inflammable material ,explosive material, easy to volatile material test sample are forbidden;

2)storage corrosive substances test sample is forbidden;

3)storage biological test is forbidden;

4)storage strong electromagnetic emission source for test sample or storage are forbidden;

Capacity /Weight/ Dimension

Internal capacity

1000L

Internal dimension

1000×1000×1000    W×H×D (mm)

External dimension

About 1200×1600×1200  W×H×D (mm)

Weight

400kg

Performance Index

Function requirement

keep heating in the room, keep long time in the set temperature scope

Test method and standard

GBT 11158-2008         High temperature test chamber technical condition

GB/T 2423.2-2001        Test B: high temperature test method

GBT 2423.2-2008        Electronic Electrician Product Environmental Test

basic parameter calibration method

Part 2:test method

Test B: high temperature

Temperature Range

Temperature range

RT+10℃→260℃

Control accuracy

Temperature deviation: ±2℃ 

Temperature uniformity: ≤2.5%℃   

Temperature fluctuation: ±0.5℃

Temperature resolution: ±0.1℃

Power

AC380V  50HZ   12KW

Power supply information

1)AC 380V three phases five wires protective grounding;

voltage fluctuation range: AC±5% V

2)Frequency fluctuation range:50±0.5HZ;

3)Power supply method: TN-S or TT method

4)Grounding resistance of protection ground wire＜4Ω

5)User should equip with relevant capacity air switch or dynamic           switch on the installation site, and the switch must control this             machine only. When the electrified test sample is put in the               test chamber, the power of the test sample should be                         connected with extra power, don’t use the power of this                       machine;

Test environment condition

environment temperature is 0℃~+35℃,and R.H. is ≤90％,no test sample in the chamber