Click image to view original image
|
The test is applied to the products that may suffer from different temperature spraying water during ship -ping, storage or use time. The water comes from downpour, weather-beaten, water sprinkler system, wheel splash, flush filling or fierce waves conditions to test the performance index of products and for quality management use. |
Major Parameter:
|
Model |
CZ-600LY |
|
|
Specimen Limitation |
1)inflammable material ,explosive material,easy to volatile material test sample are forbidden; 2)storage corrosive substances test sample is forbidden; 3)storage biological test is forbidden; 4)storage strong electromagnetic emission source for test sample or storage are forbidden |
|
|
Capacity / Weight /Dimension |
||
|
Capacity |
216L |
|
|
Internal size |
600x600x600 (mm) W×H×D |
|
|
External size |
|
|
|
Weight |
200kg |
|
|
Working noise |
≤75db (The value got at the point with 1 meter away from the front site of the machine and 1.2 height from the ground.) |
|
|
Maximum power |
2 KW |
|
|
Maximum current |
9A |
|
|
(selection item) |
1.equip with DC12V 24V 36V 20A DC electrical power 2.reserved power connection interface terminal, customer can equip it by himself 3.install waterproof plug inside chamber, power supply is AC 220V 20A |
|
|
Power supply information |
1)AC 220V single phase R,N+ protective grounding; voltage fluctuation range 10% 2)Frequency fluctuation range: 50±0.5HZ; 3)Power supply method: TN-S or TT method 4)Grounding resistance of protection ground wire＜4Ω 5)User should equip with relevant capacity air switch or dynamic switch on the installation site,and the switch must control this machine only.When the electrified test sample is put in the test chamber,the power of the test sample should be connected with extra power,don’t use the power of this machine; |
|
|
Performance Index |
||
|
Operating environment condition |
The value is got under condition of environment temp. is +25℃,R.H. is ≤85％,no specimen in the chamber. |
|
|
1. spray water temp. can’t be controlled as environmental temp. 2. select water temperature control mode based on requirement, water temperature could controlled within RT～75℃ (selection item) |
||
|
1.6L/min |
||
|
Spray method |
||
|
180°half round swing pipe swing pipe inner diameter: ∮16mm swing pipe radius: 200 mm |
||
|
As the centre for the point, swing to right and left with angle of 175°,total 350°;the angle could be adjustable within this range. |
||
|
Swing pipe control mode |
Adopt human-computer interface input, PLC output control servo motor and absorb its feedback signal to control the angle of swing pipe |
|
|
Spray swing pipe cycle |
3～12S (adjustable) |
|
|
Rotary speed of rotary table |
1～10r/min (adjustable) |
|
|
≤100kg |
||
|
∮250mm |
||
|
placement |
The nozzle distributes at both sizes of angle vertical plane 90°angle arc, the centre-to- centre between the two nozzles is 50mm. |
|
|
inner diameter:0.4mm |
||
|
Specimen fixed (selection item) |
can based on the sharp and size of specimen to customize test grip for fixing the specimen ( customer need to supply the detail drawing size of specimen or really specimen to us) |
|
|
IP3 IP4 |
GB/T 2423.38-2006/IEC 60068-2.18:2000 --Part two: Swing pipe spray test method GB4208-2008/IEC60529-2001--Shell protection grade |
|
