Click image to view original image
Major Function
|
This equipment imitates the solar radiation on the ground. It is widely used in confirmation of electrician and electronic products for its weathering resistance adaptability(especial for change condition of electrical performance and machine performance of the products)under the condition of solar radiation and related temperature and humid. It is also used in inspecting some corrosive ability of the specimen. |
|
CZ-800XD
|
||
|
Test specimen limitation |
1) test samples of inflammable, explosive material, easy to volatile material are forbidden; 2)storage corrosive substances test sample is forbidden; 3)storage biological test is forbidden; 4)storage strong electromagnetic emission source for test sample or storage are forbidden; |
|
|
Capacity / Weight / Dimension
|
||
|
Internal capacity |
769.5 L
|
|
|
Internal dimension |
900×900×900 (mm) W×H×D
|
|
|
External dimension |
|
|
|
Weight
|
450kg
|
|
|
Working noise |
≤70db (The value got at the point with 1 meter away from the front site of the machine and 1.2 height from the ground.) |
|
|
Maximum watt |
13.2 KW
|
|
|
Maximum current |
16 A
|
|
|
Power supply information |
1)AC 380V three phases with R, S, T, N + protective grounding; voltage fluctuation range 10% 2)Frequency fluctuation range:50±0.5Hz 3)Power supply method: TN-S or TT method 4)Grounding resistance of protection ground wire＜4Ω 5)User should equip with relevant capacity air switch or dynamic switch on the installation site, and the switch must control this machine only. When the electrified test sample is put in the test chamber, the power of the test sample should be connected with extra power, don’t use the power of this machine; |
|
|
Performance Index |
||
|
Environment requirements
|
Environment temperature:+25℃;R.H.≤85%
This two values measured under the condition of no test sample in the chamber |
|
|
Temp./humid range
|
blackboard temperature(irradiation temperature):55～110℃ temperature range: RT～100℃
humidity range: at irradiation :30%～60%RH;in dark:20%RH～98%RH (see as below picture)
|
|
|
Spectral wavelength
|
350-850nm
|
|
|
2.0 KW
|
||
|
Irradiation tube
|
tubular xenon long-arc light source
|
|
|
Irradiation intensity
|
500W/㎡～1100W/㎡
|
|
|
Tube cooling method
|
air-cooled
|
|
|
Test staging
|
dynamic rotary testboard, speed is ≥1r/min,electrodeless adjustment for speed
|
|
|
Test block size
|
50mm*200mm(W*H) each piece, total 30 pcs (standard configuration) |
|
|
Spray time
|
1～9999 minutes, adjustable
|
|
|
Nozzle diameter
|
∮0.8mm
|
|
|
Spraying cycle
|
can adjust freely
|
|
|
Control accuracy
|
temperature resolution: 0.01℃ humidity resolution: 0.1%RH temperature deviation: ±1.5℃ humidity deviation: ±2%RH |
|
|
Heating rate |
RT→+100℃≤35 min
|
|
red is irradiation humidity range;blue is dark humidity range
