Click image to view original image
HS-205
A process to non-metallic filler, the outside coated with a layer of sheet metal gasket production machines.
First：A shear good sheet metal into the machine forming the wheel and drive between the guide pulley to start the motor slowly forming round sheet metal pressed into the drive guide wheel.
Second：ready-coated non-metallic filler: such as graphite, asbestos, glass fiber. Into forming themiddle of a good sheet metal, and Close the lid (the pre-cut sheet metal). Third：the plastic wheelwith the repression of the drive guide wheel molding gasket called jacketed gaskets.
Select the configuration:1.Random with eight sets of mold: molding round of eight sets
of eight sets of integer round
2.Other mold according to customer order.
Technical parameters:
| Model |
HS-205 coating machine
|
| Coated shim thickness | 1.5---8mm |
| Jacketed gaskets width | ≤80mm |
| Maximum gasket diameter | 4000mm |
| Minimum gasket diameter | 150mm |
| Total Power | 4kw |
| Motor Power | 1.5kw |
| Voltage | 380V/220VOptional |
| Line speed | 0--150mm/s |
| Inverter controller | 2.2G |
| Dimension | 900*500*1200 |
|
Weight |
200kg |
