Arch Building Machine CS-1000-680

Arch Building Machine CS-1000-680

Application:

This machine can be used for site working. Using this machinery can use in the construction of warehouses, workshops, hangars, and also in the production of boats, vehicles, and highway guardrails, etc.

Introduction:

The equipment consists of two parts, one is forming part, another is arching part. These two parts are sit on a mobile frame moving from here and there. Someone even call it mobile factory. We are the professional manufacture with 10 more years since the beginnings in China. Not only sell equipments but also offer engineering service. 

The models we provided 600 series, 914 serious, 1000 series, 1220 series, 1250 series . If you have special request, we will work it out according to you. The following is a table for your reference:

TYPE	Width of the coil	Width of the formed sheet	Thickness of the coil	Proper span
CS-600-305	600 mm	305mm	0.8-1.5 mm	≤24m
CS-914-400	914mm	400mm	0.8-1.5 mm	≤40m
CS-914-610	914 mm	610 mm	0.8-1.5 mm	≤38m
CS-914-650	914 mm	650 mm	0.8-1.5 mm	≤28m
CS-914-700	914 mm	700 mm	0.8-1.5 mm	≤24m
CS-914-750	914 mm	750 mm	0.8-1.5 mm	≤15m
CS-1000-400	1000mm	610mm	0.8-1.5mm	≤40m
CS-1000-550	1000mm	610mm	0.8-1.5mm	≤30m
CS- 1000-610	1000mm	610mm	0.8-1.5mm	≤39m
CS -1000-680	1000mm	680mm	0.8-1.5mm	≤32m
CS -1000-700	1000mm	700mm	0.8-1.5mm	≤28m
CS -1000-750	1000 mm	750 mm	0.8-1.5 mm	≤25m
CS -1000-800	1000 mm	800 mm	0.8-1.5 mm	≤14m
CS -1220-800	1250 mm	800 mm	0.8-1.5 mm	≤42m
CS-1250-800	1250 mm	800 mm	0.8-1.5 mm	≤42m

If you are not familar with this system, please contact us to work out the best solution for you. The features of this Arching roof are:

1.Self-support roof. There is no beams, columns or structure. The roof sheets are locked by a seaming machine. 

2. Cost save. This building doesn't requires a mount of screws and bolts. But the roofing system is secure enough for construction. The beautiful roof will attract your eyes.

3. Labor save. Compared with traditional building, a small group will complete the Arching roof project in very shot time. 

MAIN TECHNICAL SPECIFICATION 

Size: 9000mm×2250mm×2300mm          

Total weight: About 15000KG

Material of bending leaf: Stainless Steel

Thickness of bending leaf: 12mm

Cutting Material: Cr12MoV, Heat treatment

Cutting type: Hydraulic / Mechanical controlling cutting

Total motor power: 18.5KW

Forming Power: 7.5KWB

ending Power: 4.0KW

Cutting Power: 4.0KW

Conical Power: 3.0KW

Material of rollers: 45# steel, quenched HRC 58-62

Material of shafts: 45# steel, adjusted

Step of rollers: 13  

Applicable Span: 32m max.

Width of the Panel: Feeding width: 1000mm

Finished width: 680mm

The depth of the groove: 223mm

Operating factor of the panel: 68%

Thickness of the Panel: 0.8-1.5mm

Working Speed: Straight Sheet: 15m/min

Arch Sheet: 13m/minSeaming: 6m/min

Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement

Controlling system: PLC