Click image to view original image
Arch Style Building Machine CS-1250-800/Arch Roof Forming Machine/Qspan Machine
This type can make big span buildings. It has good snow load. The building constructed by this type widely used in Russia.
Types of Our Machine
|
TYPE |
Width of the coil |
Width of the formed sheet |
Thickness of the coil |
Proper span |
|
CS-600-305 |
600 mm |
305mm |
0.8-1.5 mm |
≤24m |
|
CS-914-400 |
914mm |
400mm |
0.8-1.5 mm |
≤40m |
|
CS-914-610 |
914 mm |
610 mm |
0.8-1.5 mm |
≤38m |
|
CS-914-650 |
914 mm |
650 mm |
0.8-1.5 mm |
≤28m |
|
CS-914-700 |
914 mm |
700 mm |
0.8-1.5 mm |
≤24m |
|
CS-914-750 |
914 mm |
750 mm |
0.8-1.5 mm |
≤15m |
|
CS-1000-400 |
1000mm |
610mm |
0.8-1.5mm |
≤40m |
|
CS-1000-550 |
1000mm |
610mm |
0.8-1.5mm |
≤30m |
|
CS- 1000-610 |
1000mm |
610mm |
0.8-1.5mm |
≤39m |
|
CS -1000-680 |
1000mm |
680mm |
0.8-1.5mm |
≤32m |
|
CS -1000-700 |
1000mm |
700mm |
0.8-1.5mm |
≤28m |
|
CS -1000-750 |
1000 mm |
750 mm |
0.8-1.5 mm |
≤25m |
|
CS -1000-800 |
1000 mm |
800 mm |
0.8-1.5 mm |
≤14m |
|
CS -1220-800 |
1250 mm |
800 mm |
0.8-1.5 mm |
≤42m |
|
CS-1250-800 |
1250 mm |
800 mm |
0.8-1.5 mm |
≤42m |
MAIN TECHNICAL SPECIFICATION
1. Size: Forming part: 10000mm×1500mm×2200mm
Curving part: 1800 mm×1400 mm×2000mm
2. Total weight:
3. Material of bending leaf: Stainless Steel, 12mm
4. Cutting Material: Cr12, 1MOV, Heat treatment
5. Cutting type: Hydraulic / Mechanical controlling cutting
6.Total motor power: 18.5KW Forming Power: 7.5KW Bending Power: 4.0KW
Cutting Power: 4.0KWConical Power: 3.0KW
7. Material of rollers: 45# steel, quenched HRC 58-62
8. Material of shafts: 45# steel, adjusted
9.Step of rollers: 13
10. Applicable Span: 42m max.
11. Feeding width: 1250mm
12. Finished width: 800mm
13.The depth of the groove: 300mm
14. Operating factor of the panel: 64%
15. Thickness of the Panel: 0.8-1.5mm
16.Working Speed: Straight Sheet: 15m/min
Arch Sheet: 13m/min
Seaming: 6m/min
17. Electric Standard: 380V /50 HZ / 3 PHASES or according to your requirement
18. Controlling system: PLC (Omron, Japan)
19. Passive decoiler: max.capacity of 5000kgs suitable for trailer carrying
20. Working procedures: feeding-forming-cutting-curving
