Click image to view original image
machine photos:
Application:
This machine can be used for site working. Using this machinery can use in the construction of warehouses, workshops, hangars,
and also in the production of boats, vehicles, and highway guardrails, etc.
Introduction:
The equipment consists of two parts, one is forming part, another is arching part. These two parts are sit on a mobile
from here and there. Someone even call it mobile factory. We are the professional manufacture with 10 more years since the
beginnings in China. Not only sell equipments but also offer engineering service.
The models we provided 600 series, 914 serious, 1000 series, 1220 series, 1250 series . If you have special request, we will work
it out according to you. The following is a table for your reference:
|
TYPE |
Width of the coil (mm) |
Width of the finished sheet (mm) |
The depth of the groove (mm) |
Thickness of the coil (mm) |
Max span |
Use ratio |
| CS(600-305) | 600 | 305 | 109 | 0.8-1.5 |
≤24m |
51% |
| CS(914-400) | 914 | 400 | 210 | 0.8-1.5 |
≤40m |
43.8% |
| CS(914-610) | 914 | 610 | 203 | 0.8-1.5 | ≤38m | 66.7% |
| CS(914-650) | 914 | 650 | 181 | 0.8-1.5 |
≤28m |
71.1% |
| CS(914-700) | 914 | 700 | 123 | 0.8-1.5 | ≤24m | 76.6% |
| CS(914-750) | 914 | 750 | 86 | 0.8-1.5 | ≤15m | 82% |
| CS(1000-400) | 1000 | 400 | 253 | 0.8-1.5 | ≤40m | 40% |
| CS(1000-550) | 1000 | 550 | 187.5 | 0.8-1.5 | ≤30m | 55% |
| CS(1000-610) | 1000 | 610 | 243 | 0.8-1.5 | ≤39m | 61% |
| CS(1000-680) | 1000 | 680 | 22 | 0.8-1.5 | ≤32m | 68% |
| CS(1000-700) | 1000 | 700 | 175 | 0.8-1.5 | ≤28m | 70% |
| CS(1000-750) | 1000 | 750 | 138 | 0.8-1.5 | ≤25m | 75% |
| CS(1000-800) | 1000 | 800 | 114 | 0.8-1.5 | ≤14m | 80% |
|
CS(1220-800) CS(1250-800) |
1220 1250 |
800 800 |
300 320 |
0.8-1.5 |
≤42m |
65.5% 64% |
If you are not familar with this system, please contact us to work out the best solution for you. The features of this
Arching roof are:
1.Self-support roof. There is no beams, columns or structure. The roof sheets are locked by a seaming machine.
2. Cost save. This building doesn't requires a mount of screws and bolts. But the roofing system is secure enough for
construction. The beautiful roof will attract your eyes.
3. Labor save. Compared with traditional building, a small group will complete the Arching roof project in very shot time.
The other equipement you may consider for the project.
1. PU insulation sparying machine: It is widely used in different kinds of areas such as refrigerator
warehouse heat preservation, building external wall, roof water-proof and heat preservation,
gymnasium, motorcar and ship, air conditioner adiabatic, and solar water heater and so on.
2. Tube bending machine: To bend round tube, square tube to make skylights
for arched roof, or as the supporter of the first arch sheet of the buildings.
3. Wind Cowls: Air circulation.
4.Lifter: Raise people in the construciton project.
