Click image to view original image
1.Types of our machine
2.Main technical
Size: 9000mm×2250mm×2300mm
Total weight:
Material of bending leaf: Stainless Steel
Thickness of bending leaf: 12mm
Cutting Material: Cr12MoV, Heat treatment
Cutting type: Hydraulic / Mechanical controlling cutting
Total motor power: 15KW
Forming Power: 5.5KW
Bending Power: 4.0KW
Cutting Power: 4.0KW
Conical Power: 1.5KW
Material of rollers: 45# steel, quenched HRC 58-62
Material of shafts: 45# steel, adjusted
Step of rollers: 13
Applicable Span: 28m max.
Feeding width: 914mm
Finished width: 650mm
The depth of the groove: 181mm
Operating factor of the panel: 71.1%
Thickness of the Panel: 0.8-1.5mm
Working Speed: Straight Sheet: 15m/min
Arch Sheet: 13m/min
Seaming: 6m/min
Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement
Controlling system: PLC
3.Profile
4.Photos of machine
5.List of accessories
|
Name |
Usage |
Amount |
|
Decoiler(core shaft and cradle) |
Hold and feed the coils |
1 |
|
Sewing machine |
Assembling the sheets |
1 |
|
Straight sheets cradle |
Plate supporter |
8 |
|
Arch sheets cradle |
Plate supporter |
8 |
|
Straight sheets side cradle |
Plate supporter |
8 |
|
Suspender |
Lifting |
3 |
|
Clamp(UNIQUE BIG TYPE) |
Bait sheets |
8 |
|
Manual Super pliers |
Bait sheets |
1 |
|
Driving chains |
To roll the gears |
3M |
|
Chain half section |
As spare |
5 |
|
Chain whole section |
As spare |
3 |
|
Instruction book |
To guide you how to use the machine |
1 |
|
Switch |
As spare |
1 |
|
Length sensor |
To control the length by manual |
1 |
|
PLC |
To control the length and quantities |
1 |
|
Rolling cradle |
To rise and fall the machine |
2 |
We provide all the accessories for free.
6.Photos of accessories
7.Photos of factory
Project Photos
