Click image to view original image
CS-1000-750 Arch style building machine/bending machine
1.Application:
This machine can be used for site working. Using this machinery can use in the construction of warehouses, workshops, hangars,
and also in the production of boats, vehicles, and highway guardrails, etc.
2.Introduction:
The equipment consists of two parts, one is forming part, another is arching part. Thee two parts are sit on a mobile
moving from here and there. Someone even call it mobile factory. We are the professional manufacture with 10 more years
since the beginnings in China. Not only sell equipments but also offer engineering service.
The models we provided 600 series, 914 serious, 1000 series, 1220 series, 1250 series . If you have special request, we will work it out according to you. The following is a table for your reference:
3.Advantages
If you are not familar with this system, please contact us to work out the best solution for you. The features of this Arching roof are:
(1).Self-support roof. There is no beams, columns or structure. The roof sheets are locked by a seaming machine.
(2). Cost save. This building doesn't requires a mount of screws and bolts. But the roofing system is secure enough for construction. The beautiful roof will attract your eyes.
(3). Labor save. Compared with traditional building, a small group will complete the Arching roof project in very shot time.
4. Main technical
|
Forming machine size |
9000mm*2250mm*2300mm |
|
Feeding width effective width |
1000mm 750mm |
|
Equipment weight |
15000kg |
|
Material of shaft |
45#steel adjustable treatment |
|
Material of the machine |
stainless steel |
|
Material of roller |
Cr12, quenched treatment HRC58-62 |
|
Number of forming rollers |
13 |
| depth of the groove | 138mm |
|
Thickness of the panel |
0.8-1.5mm |
|
Transportation system |
Chain transportation |
|
operating factor |
75% |
|
total motor power |
18.5kw |
|
Electric Standard: span |
380V / 50 HZ / 3 PHASES or according to your requirement 25m |
|
speed |
forming:15m/min bending:13m/min |
|
controlling system |
PLC |
|
cutting type |
hydraulic/mechanical controlling cutting |
5.List of accessories
|
Name |
Usage |
Amount |
|
Decoiler(core shaft and cradle) |
Hold and feed the coils |
1 |
|
Sewing machine |
Assembling the sheets |
1 |
|
Straight sheets cradle |
Plate supporter |
8 |
|
Arch sheets cradle |
Plate supporter |
8 |
|
Straight sheets side cradle |
Plate supporter |
8 |
|
Suspender |
Lifting |
3 |
|
Clamp(UNIQUE BIG TYPE) |
Bait sheets |
8 |
|
Manual Super pliers |
Bait sheets |
1 |
|
Driving chains |
To roll the gears |
3M |
|
Chain half section |
As spare |
5 |
|
Chain whole section |
As spare |
3 |
|
Instruction book |
To guide you how to use the machine |
1 |
|
Switch |
As spare |
1 |
|
Length sensor |
To control the length by manual |
1 |
|
PLC |
To control the length and quantities |
1 |
|
Rolling cradle |
To rise and fall the machine |
2 |
We provide all the accessories for free.
6.Photos of accessories
7.Photos of factory
8.Project Photos
