Click image to view original image
Species: oil, water, high temperature, low temperature of injection molding.Classification: inorganic, organic, long wave (365nm), short wave (254nm).
Emitting light colors: red, purple, yellow green, blue, green, yellow, white, blue,orange, green.
Usage and dosage: adding 20% - 30%, generally 25%.
Product size: 5 - 10 um.
Temperature: 190 ℃ -300 ℃.
Application scope: plastic fluorescent powder, silica gel, ink, paint, plastic injection molding, coating, textile printing paste, advertisement decoration,water system, children's toys, security identification, sports etc..
Plastic injection and extrusion: is suitable for processing all kinds of plastic,such as PP, PE, PVC, PU, PS, ABS, TPR, EVA, Nylon, Acrylic, development of plastic melt index (MI) greater than 10, the bending elasticity coefficient is less than 13000. Suggest adding amount of 0.2%-5.0%, generally 0.5%;processing should be first plastic material wetting with wax oil (note the wax oilshould not exceed 2% of plastic material), then the color powder is added to the plastic material inside stir, stir when attention dispersion, dispersion of badmay join the appropriate amount of dispersant. With different pigments mixed use, with a color change is more diverse. Should be avoided in 250 ℃ aboveprocess for processing. Processing can be added for phosphor content of 20% antioxidant and 20% thermal stabilizer, in order to improve the stability of the. Tired of light color photosensitive materials produced by UV light,excessive insolate, acid, free radical (singlet oxygen) and humidity cause,generally suggest adding UV absorber and antioxidants to increase the antifatigue properties of light.
Toxicity and safety: no irritation to the skin, does not contain harmfulsubstances, comply with the safety of toys and food packaging standard.
Characteristics: higher light transmittance, high solvent resistance, resistance to acid and alkali.
Storage: should be stored in sealed airtight, dry, dark place, avoid direct sunlight.
