Click image to view original image
ZSW vibrating feeder is widely used in the joint equipment of crushing and screening for metallurgy, coal mine, mineral separation, artificial sand, building waste recycling, building material, chemical industry and abrasive industry, etc. It conveys the ready material from storage or hoppers to the fed equipment uniformly, continuously or quantitatively. In crushing line, this machine can primarily screen the material and feed the crushing equipment continuously and uniformly.
Feature:
1. Be applied to kinds of rock, especially suitable for viscous material; and can be work in dust condition or water more environment.
2. Enclosed body structure, prevent dust pollution.
3. Equipped with double eccentric shaft as vibration source, stable amplitude guarantee the stable flow of vibrating material.
4. Less wearing parts, low power consumption of vibration, significant energy save.
5. The gap between grizzly bars can be adjusted to customer’s requirement, thus screen the material primarily.
Principle:
Vibrating feeder is consisting of feeding trough, vibrator, spring set, transmission device and so on. The vibrating source is the vibrator, which is made of two eccentric shaft and gears. The motor dives the key shaft by triangle belt; then the gears in the key shaft joggle the driven shaft to rotate, the key shaft and the driven shaft rotate in the opposite direction at the same time. Thus the trough is vibrated; material is conveyed to required place continuously.
Specification:
Feature:
1. Be applied to kinds of rock, especially suitable for viscous material; and can be work in dust condition or water more environment.
2. Enclosed body structure, prevent dust pollution.
3. Equipped with double eccentric shaft as vibration source, stable amplitude guarantee the stable flow of vibrating material.
4. Less wearing parts, low power consumption of vibration, significant energy save.
5. The gap between grizzly bars can be adjusted to customer’s requirement, thus screen the material primarily.
Principle:
Vibrating feeder is consisting of feeding trough, vibrator, spring set, transmission device and so on. The vibrating source is the vibrator, which is made of two eccentric shaft and gears. The motor dives the key shaft by triangle belt; then the gears in the key shaft joggle the driven shaft to rotate, the key shaft and the driven shaft rotate in the opposite direction at the same time. Thus the trough is vibrated; material is conveyed to required place continuously.
Specification:
| Model | Hopper size (mm) |
Max feed size (mm) |
Capacity (t/h) |
Shaft rotate speed (r/min) |
Motor power (KW) |
weight (t) |
Dimension (mm) |
| GZD-1225 GZD-250×75 |
2500x1200 2500×750 |
250 300 |
150-450 50-80 |
2.2x2 3.0×2 |
2.2 1.29 |
2549x1761x1172 2580×1430×600 |
|
| GZD-300×90 | 3000×900 | 450 | 80-100 | 3.7×2 | 2.96 | 3050×1430×1550 | |
| GZD-370×100 | 3700×1050 | 500 | 100-150 | 5.5×2 | 3.7 | 3980×1878×866 | |
| GZD-490×110 | 4900×1100 | 580 | 120-280 | 5.5×2 | 4 | 5200×1900×950 | |
| GZD-500×120 | 5000×1200 | 600 | 200-400 | 5.5×2 | 5.2 | 5450×2000×900 | |
| ZSW-380×96 | 3800×960 | 500 | 100-160 | 500-720 | 11 | 4.21 | 3882×1684×1340 |
| ZSW-490×110 | 4900×1100 | 580 | 120-280 | 500-800 | 22 | 5.41 | 4957×1841×1365 |
| ZSW-590×110 | 5900×1100 | 850 | 200-350 | 500-800 | 30 | 6.05 | 6000×1841×1365 |
| ZSW-600×130 | 6000×1300 | 1000 | 400-560 | 500-800 | 30 | 7.5 | 6028×2580×2083 |
