1. Use for grouting with tight clearance requirements.
3. Use for grout and fill or repair voids within ducts of post-tensioning strands for corrosion protection.
4. Used for grouting cable anchor plates where grout contacts highly stressed anchorages
5. Use for vacuum grouting for repair of voids in previously grouted post-tensioned tendons.
Item
|
Properties
|
|
Gray powder
|
||
Portland cement
|
||
Wet Density
|
2.00kg/L
|
|
Water-cement ratio
|
0.26~0.28
|
|
Total Chloride ions
|
None
|
|
Initial Setting Time( GB/T1346-2001)
|
|
|
Final setting Time( GB/T1346-2001)
|
Less than 24h
|
|
Flow Cone Efflux time (TB/T3192-2008)
|
20~35s
|
|
24h Swell Ratio ( TB/T3192-2008)
|
betwween4%and8%
|
|
Compressive Strength (GB/T17671-1999)
|
1d
|
More than 20MPa
|
3d
|
More than 35MPa
|
|
7d
|
Approximately 50MPa
|
|
28d
|
Approximately 60MPa
|
Yield
One bag (25 kg) of DMARGROUT® 818 mixed at 22° C with water as the water-cement ratio of 0.26~0.28l produces approximately 0.016m3 of fluid grout at a 20 – 30second flow. One ton is produced approximately 0.64 m3.
Packing
It is applied for 25 kg multi-wall paper bags
Shelf life
Above 6 months when properly stored
Storage
DMARGROUT® 818 should be Stored in unopened packaging in clean, dry, cool environment away from heat or sunlight.