Industrial Temp Controlling Test Chamber
Humidity Control Tester/Main features:
1.Test System advanced and reasonable structure design , manufacturing process specifications , appearance beautiful, generous .
2.supporting parts and assembly matching is good, the main function components areimported parts with the international advanced level , improved product safety and reliability , to ensure that the user for a long time , high -frequency requirements.
3.interactive touch screen input system , easy to learn , powerful ;
4.You can set the program to 100 groups , 1,000 steps , the number of cycles up to 999 times , each time setting the maximum 99 hours 59 minutes ;
5.with RS232 communication interface , can easily be controlled by the PC and monitor , but also optional RS485 interface , easy to use ;
6.has a program amendment , clear , appointment , starting, power , memory, key lock and other functions ;
7.with a variety of alarm, fault occurs while the fault is displayed by the screen , eliminating the fault ;
Technical Parameters:
|
Model
|
TH-225(A~F)
|
|
Internal Dimension WxHxD (mm)
|
600x750x500
|
|
Internal Dimension WxHxD(mm)
|
1200x1900x1150
|
|
Approx. Weight (Kg)
|
250
|
|
Compressor
|
French Tecumseh Brand, Germany Bizer Brand
|
|
Power
|
AC220V 1∮ 3 lines, 50/60HZ ,
AC380V 3∮ 5 lines , 50/60HZ
|
|
Temperature Rising/Falling Velocity
|
Temperature rising approx. 0.1~3.0℃/min ;
temperature falling approx. 0.1~1.5℃/min;
( Falling Min.1.5℃/min is optional)
|
|
Inner and Outer Material
|
Interior material is SUS 304# stainless steel,
exterior is stainless steel or SEE cold-rolled steel with paint coated.
|
1.power overload, passing control back to the overload, short circuit protection
2.ground fault protection, motor overload protection
3.over-temperature protection
4.in order to protect the equipment,all alarms are automatically cut off the power , and send voice prompts.
Design life of the solar cell module isabout20 to 30 years, the reliability of the test is a simulation of the land and the photovoltaic module ( crystalline silicon , amorphous silicon film , condenser ) design verification , so the module can be in the general climate long-term operation for more than 20 years , the need for solar specifications : after Thermal cycle test ( temperature cycling test ), Humidity-freeze test ( wet freezing test ), Damp Heat ( heat test ) to confirm that the solar cell can withstand high temperature and humidity with subzero temperature level , as well as for fatigue and hot temperature changes caused by repeated failure , in addition to determine the solar cell 's ability to resist moisture penetration long .
Click image to view original image
