32 Channel Digital Video Fiber Converter with Optical Multiplexer

·       8-bit digitally encoded and non-compression broadcast quality video transmission

·       Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

·       Support any high-resolution video signal  

·       Automatic compatible PAL, NTSC and SECAM video system

·       Power supply and other parameter state indication, which can monitor the operation condition of system

·       Support no-damage regenerative trunk of video

·       Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .

·       Special ASIC design .

·       Industry-grade of operating temperature from -40��?/span> to 85��?/span> , which is applied to the different working environment

Technical Specifications 

·       Video channels: 32 channels

·       Video bandwidth: 8 MHz

·       Automatic compatible video system: PAL��?/span>NTSC��?/span>SECAM

·       Video input / output impedance:    75 Ω(unbalance)

·       Video signal-to-noise ratio: ≥67dB

·       Differential gain: ��?/span>10%-90%APL��?/span> DG <1% ( typical value)

·       Differential phase: ��?/span>10%-90%APL��?/span> DP <0.7° ( typical value)

·       Video connector: BNC

·       Fiber connector: SC/ST/FC

·       Dimensions: 48.3(L)×22(W)×9.0(H) cm ( 19’’ 2U )

·       Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )

·       Operating Temperature: -40��?/span> to +85��?/span>

·       Storing Temperature: -55��?/span> to +85��?/span>

·       Humidity: 0 to 95% non-condensing

·       MTBF: ≥ 105 hours