Click image to view original image
Introduction of Cement Ball Mill:
The Cement Ball Mill is a key equipment to grind the crushed materials, and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc, and the ball mill can grind various ores and other materials with dry type and wet type. There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material. 
Features of Cement ball mill:
Our Ball Mill can be used to dry grinding or wet grinding;
operating conditions are good, grinding machine in a confined within, there is no dust flying;
operation and reliable, grinding cheap, and easy to replace;
can be intermittent operation , but also continuous operation;
crush explosive materials, the mill can be filled into the inert gases instead of air.
Main Technical Parameters of Cement ball Mill:
| Spec. (m) | Rotary speed（r/min） | Feed size （mm） | Capacity（t/h） | Load of grinding media （t） | Main motor | Main reducer | Weight (exclude motor and reducer)（t） | |||
| Model | Power（kw） | Speed （r.p.m） |
Model | Speed ratio | ||||||
| Φ2.2×11 | 22.2 | ≤25 | 15～17 | 50 | JR1512-8 | 570 | 740 | ZD80 | 5 | 83 |
| Φ2.4×8 | 20.91 | ≤25 | 14～18 | 39.5～42 | JRQ1512-8 | 570 | 740 | ZD80 | 5 | 76.4 |
| Φ2.4×9 | 20.91 | ≤25 | 23～25（close） | 50 | TR1512-8 | 570 | 740 | ZD80 | 5 | 81 |
| Φ2.4×10 | 20.91 | ≤25 | 16～18（open） | 50 | TR1512-8 | 630 | 740 | ZD80 | 5 | 92.4 |
| Φ2.4×11 | 21 | ≤25 | 17～19（open） 20～22（close） |
60～62 | YR710-8/1180 | 710 | 740 | JDX630 | 5.6 | 105 |
| Φ2.4×13 | 21 | ≤25 | 21～22（open） 24～26（close） |
66～68 | YR800-8/1180 | 800 | 740 | MBY710 | 6.3 | 117 |
| Φ2.6×10 | 20.6 | ≤25 | 21～24 | 64 | YR800-8/1180 | 800 | 740 | JDX710 | 6.3 | 133 |
| Φ2.6×13 | 20.6 | ≤25 | 28～31 | 80 | YR1000-8/1180 | 1000 | 740 | JDX800 | 6.3 | 151 |
| Φ3.0×9 | 19.13 | ≤25 | 35～40（close） | 80～83 | YR1000-8/1180 | 1000 | 740 | MBY800 | 7.1 | 137 |
| Φ3×11 | 18.92 | ≤25 | 44～47（close） | 95～100 | YR1250-8/1430 | 1250 | 740 | JDX900 | 7.1 | 159 |
| Φ3×13 | 18.92 | ≤25 | 39～45（open） | 110～116 | YR1400-8/1430 | 1400 | 740 | JDX900 | 7.1 | 183 |
| Φ3.2×11 | 18.3 | ≤25 | 45～48（close） | 110～112 | YR1400-8/1430 | 1400 | 740 | JDX900 | 7.1 | 195.5 |
| Φ3.2×13 | 18.7 | ≤25 | 45～55（open） | 125 | YR1600-8/1430 | 1600 | 740 | JDX1000 | 7.15 | 213 |
| Φ3.5×13 | 17.5 | ≤25 | 50～60 | 150 | YR2000-8/1730 | 2000 | 740 | JDSX1000 | 6.3 | 240.5 |
| Φ3.8×13 | 16.3 | ≤25 | 65～70 | 185 | YR2500-8/1730 | 2500 | 740 | JS130-C-F1 | 220 | |
| Φ4×13 | 16.3 | ≤2 | 78～80 | 191 | YRKK900 | 2800 | 745 | JS140-A | 200 | |
| Φ4.2×11 | 15.6 | ≤2 | 120～140 | 190 | YR2800-8/1730 | 2800 | 740 | JS140-A-F1D | 245 | |
| Φ4.2×13 | 15.6 | ≤2 | 140～155 | 225 | YRKK1000-8 | 3350 | 995 | JS150-A | 260 | |
| Φ4.6×13 | 14.5 | ≤25 | 140 | 280 | YR1000-6 | 4500 | 740 | 365 | ||
| Φ5.0×15 | 14 | ≤25 | 160～165 | 350 | YRKK1000-8 | 6000 | 740 | 420 | ||
