Click image to view original image
United States Parker Parker pumps
U.S. Parker Parker Pump: Parker Parker PVP PVM Series Axial Piston Pump Series PVS Series Variable Axial Piston Pump Series Gear Pump Vane Pump P5X GP and GP * AN Series Gear Pump GP * / GP * series of dual-gear pump SD500 series turbocharger
Parker Parker PVM series of axial piston pump
Parker Parker PVM with the standard series of axial piston pump with pressure regulator and pressure regulator with two remote control options. The maximum displacement from 16 to 92ml/rev, rated working pressure of 250bar, the minimum transfer speed of 300 per minute, drain port facing up. Models are: PVM016, PVM020, PVM023, PVM028, PVM032, PVM040, PVM046, PVM063, PVM080, PVM092 so.
Parker Parker PVP series of axial piston pump
Parker Parker PVP series of maximum displacement axial piston pumps from 16 to 140ml/rev, rated working pressure of 250bar, the minimum speed of 500 rpm per minute. Models are: PVP016, PVP023, PVP033, PVP041, PVP048, PVP060, PVP076, PVP100, PVP140 so.
Parker Parker PVS series of variable vane pump
Parker Parker PVS series of variable vane pump for the swashplate structure, the advantages of regulation time is short, wide adjustment range, low noise, high efficiency. Displacement was 8-50 ml / rev, a rated pressure of the oil port 140bar, speed range from 1000-1800rpm, the oil temperature is -10 to adapt to +70 degrees Celsius. Viscosity range 22-100mm2 / s. Models are: PVS08, PVS12, PVS16, PVS25, PVS32, PVS40, PVS50 so. Different functions according to regulators, this series of variable vane pump with PVS, PVY, PVD, PVH, PVM, PVK, PVL so.
Parker Parker P5X series gear pump
Parker Parker PX series gear pump is a kind of performance art, popular with the international "hub unit" style gear pump. PX series gear pump excellent performance, high efficiency, low noise work under high pressure. The series has four kinds of specifications P3X, P5X, P11X, P17X, emissions range from 0.8-52ml/rev. Provide a variety of standard options to meet the worldwide application. The advantages are: 1, up to 4000psi/276bar continuous work: material strength, journal diameter, and bearing the load is small, for work under high pressure. 2, low noise: 13 tooth gear profile, optimized flow measurement, reducing the pressure pulsation, smooth quiet operation. 3, high efficiency: pressure balanced bearing units to ensure that conditions in all operating conditions to achieve maximum efficiency 4, application flexibility: the international recognition the installation and connection form, to install an integrated valve, common inlet pump configuration of multi-joint, providing no application versatility unmatched.
Parker Parker GP and GP * AN series gear pump
Parker Parker GP and GP * AN series gear pump is used for open loop pump, die-casting aluminum body, hydrostatic gap compensation, sliding bearings, single pump or multiple-pump. This series of gear pump features include: high finishing gears. Special production techniques to make the seal gap between the minimum. Compensation for the static gap with a seal face pressure region. By choosing the best teeth makes the pump flow ripple and low noise. High pressure with high load bearing for the die-casting aluminum pump body makes use of the pump light. Displacement for the 1.6-87.6ml/rev, rated pressure up to 230bar, the maximum pressure up to 270bar.
Parker Parker GP * / GP * Series Double gear pump
Parker Parker GP * / GP * Series is a double gear pump gear pump two GP * series combination of double-pump. As the GP * series gear pump has a variety of models to choose from, so it is composed by a double-pump has very rich choice to meet different needs. For security purposes, all multi-pump must be checked allowable total load in order to avoid the drive shaft overload.
Parker Parker SD500 series turbocharger
Parker Parker SD500 series turbocharger. When the hydraulic system of a part of the high pressure piping required, if allowed to use the initial pressure, then often use the Supercharger. For the primary pressure to 125bar hydraulic clamping system is concerned, use conversion ratio of 1:4 or 1:2 turbocharger is an economic solution. To make high-pressure side quickly filled and rapid decompression can turbocharger flange below to install a check valve. Parker Parker SD500 series turbocharger structure: an important function of turbocharger components are pressurized piston, swing machine, with a positioning mechanism of the slide valve, four will be separated by high-pressure side and low-voltage circuit one-way valve. Tel :010-59790467
