Click image to view original image
| Main Parameter | DY-VHDP-I | DY-VHDP-II | DY-VHDP-III |
| Engine | 18HP air-cooled one-cylinder diesel engine | ||
| Stirring system | Hydraulic stirring system with protective device | ||
| Paint tank capacity | 225L×2 (at customers' option) | ||
| Heating mode | LPG, energy-efficient burner | Liquefied gas infrared propane heating |
Diesel injection burner |
| Dimensions (L*W*H) | 1660mm×1600mm×1850mm | 1750mm×1750mm×1900mm | 1660mm×1600mm×1850mm |
| Weight | 1720kg | ||
| Optional system | Automatic temperature control system, conducting oil jacket system, electric ignition system, engine type and brand, warning light,? lighting lamp and fire extinguishing devices |
||
| Main Parameter | DY-VHSP-I | DY-VHSP-II | DY-VHSP-III |
| Engine | 18HP air-cooled one-cylinder diesel engine | ||
| Stirring system | Hydraulic stirring system with protective device | ||
| Paint tank capacity | 300L (at customers' option) | ||
| Heating mode | LPG, ordinary burner | LPG, infrared burner | Diesel injection burner |
| Dimensions (L*W*H) | 2070mm×1010mm×1860mm | ||
| Weight | 930kg | ||
| Optional system | Automatic temperature control system, conducting oil jacket system,? electric ignition system, engine type and brand, warning light, lighting lamp and fire extinguishing devices |
||
During the construction, first, put powder coating (additives) into the hot-melt kettle. The heating temperature must be controlled between 180 ℃ ~ 210 ℃.
Keep stirring while melting, until the paint into a homogeneous liquid state.
And then, the hot-melt material is ready to be discharged into the thermoplastic machine for marking construction.
The melting paint quality affects directly to the traffic lines marking quality, so the pre-heater is a key part during thermoplastic paint road lines construction, and essential device for thermoplastic paints heating and melting.
Dayu brand thermoplastic paint pre-heaters (double-cylinder), (single-cylinder)and (trailer type )are hydraulic stirring preheater.
