A long time, traffic line cleanup is basically a manual process, high labor intensity, low efficiency, poor results and serious pollution, poor image of the industry, there is a great security risk. Change this backward state, in support of the provincial Department of Transportation, the Provincial Highway Administration R & D for the needs of the province's highway road marking removal device, and research organizations by the dayu Machinery Factory. After absorbing the mining line equipment technology and experience home and abroad, dayu machinery research and developed the horizontal milling marks removal device. The line removing equipment is hand self-propelled portable marks cleaner. It mainly applied of the principle of aerodynamics, the milling drum cavity design volute turbine structure, and set up a special exhaust and slagging channel. The blade a ventilated 9-12 high-strength wear-resistant alloy knife point welding with adjustable alloy Arbor, overcome similar models in removing the line when the dust flying everywhere, and head wear, marking residue stick the knife and affect the efficiency of the clear line problems quickly and effectively remove old marking. Experienced many changes to the road lane milling machine finally developed successfully. The auxiliary equipment structure is innovative, integrated technology has reached the international advanced level. After a road construction site demo, its simple, clear effect, job security, suitable for the cleanup of the province highway, municipal road marking, with obvious economic and social benefits.
Technical Data of DY-MPR-I/II Road Marking Remover
| Main Parameter |
DY-MPR-I |
DY-MPR-II |
| Engine |
Kohler 8.5HP or Honda 9.0HP gasoline engine |
18HP gasoline engine |
| Driving system |
Without |
Original variable speed transmission system |
| Removal grinding head |
Special steel cutter milling head |
Alloy cutter head, combined blade, bearing rod: 4 bearings /6 bearings / 12 bearings |
| Milling width |
(adjustable) |
30cm (adjustable) |
| Milling depth |
2.5mm(adjustable) |
8-10mm(adjustable) |
| Milling depth control |
Accurate pitch depth adjuster |
| Function |
Remove sunken marking, road bump, marking lines; caving road lines, road surface roughening |
| Dimensions (L*W*H) |
900mm×600mm×970mm |
1350mm×555mm×1100mm |
| Weight |
90kg |
275kg |
| Optional system |
Roll booster |
Seat trailer |
Click image to view original image
