Click image to view original image
EN 10216-5; DIN 17456; DIN 17458
GB/T14975; T14976; T13296; GB5310;
ASTM A213; A269; A312; A511; A789; A790;
JIS G3459; G3463; GOST 9940; GOST 9941;
'U' bending is done by cold working process.
'U' bending is done to the required radius as per customer drawings.
The bend portion and six inch leg is stress relieved by resistance heating.
Inert gas (Argon) is passed through it at the required flow rate to avoid oxidation in ID.
The radius is checked for its OD and wall thinning with the recommended specification.
Visual inspection for waviness and cracks is done with Dye Penetrant Test.
Each tube is then hydro tested at the recommended pressure to check for leakage.
Cotton ball test is done to check the ID cleanliness of the tube. Thereafter pickled, dried, marked and packed.
All procedure is strictly followed as per TEMA R.C.B and ASTM A-688.
