Click image to view original image
Power(W) 0.5W
Output Voltage(KV) , 0.1, 0.125, 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8, 1, 1.1, 1.25,
SPECIFICATIONS
Input Voltage:
12Vdc± 1VDC, 100mA TYP. Option: -15: 15Vdc± 1VDC, 0.1A maximum, -24: 24Vdc± 1VDC, 0.1A maximum,
Nominal Voltage Range:
7Vdc to 15Vdc.
Input Current: (typical)
Disabled: 30mA
No load: 90mA
Full load:
250mA TYP
Efficiency:
80-85%, typical
Voltage Re gulation:
Line: < 0.001%
Load: < 0.001%
Current Re gulation:
Line: < 0.001%
Load: < 0.001%
Output Voltage:
Continuously adjustable over entire output range. Available
In either positive or negative output polarity. See table for
Voltage ranges.
Output Voltage Control: Controlled by either:
1) External potentiometer 100k (set internal pot. To MGx. )
2) Remote differential voltage programming (0 to +5V gives
0 to full output).
Accuracy:
2% on all programming and monitoring,
Temperature Coefficient: (typical)
Optional: 15ppm/° C (T Option)
Environmental:
Temperature Range:
Operating: -40° C to 65° C case temperature
Storage: -55° C to 85° C, non operational
Humidity:
10% to 90%, non-condensing.
Cooling:
Convection cooled, typical. 60 watt units operating at full power
Might require additional cooling to maintain case temperature
Below 65° C. Methods may include: Forced air cooling, use of
Heat sink or metal case, etc. It is the user's responsibility to
Maintain the case temperature below 65° C. Damage to the
Power supply due to inadequate cooling is considered misuse
And repairs will not be covered under warranty.
Dimensions:
50.8x25.4x12.7
Weight:
30g
