Click image to view original image
Product introduction
|
Production capacity |
180-240t/h (under standard condition) |
|||
|
Standard condition |
||||
|
Altitude |
≤1000 m |
|||
|
Standard atmospheric pressure |
1Mpa |
|||
|
Cold aggregate average moisture content |
5% |
|||
|
Environmental temperature |
20℃ |
|||
|
Aggregate discharge temperature |
160℃ |
|||
|
Cycle time |
45s |
|||
|
The finished material |
medium-grain |
|||
|
Conditions related to production capacity The average moisture content refers to the water content of material surface, the material inside the water content would reduce the drying drum production capacity. Atmospheric temperature is around20℃, including powder and asphalt production Aggregate density is1600 kg/ M3 Aggregate proportion into the mixing equipment must be correct, conforming to the grading standard Powder density is1120 kg/ M3 Aggregate cannot be porous and patchy, altitude, the effect of fuel heating value,the finished material for grain type in Aggregate cannot be porous and schistose, altitude, influence of the fuel heating value fuel heating value, the finished material is medium-grain type |
||||
|
Standard weight measurement (static) |
Accuracy of measuring |
|||
|
Sand and stone |
±0.5% |
|||
|
Powder |
±0.25% |
|||
|
Asphalt |
±0.25% |
|||
|
The dust removal efficiency |
Dust emissions amount≤50 mg/Nm3 |
|||
|
Temperature stability |
Hot aggregate discharge temperature stability |
±5℃ |
||
|
The finished material discharging temperature stability |
±3℃ |
|||
|
Ambient noise |
≤85 dB (A) |
|||
|
Operating reliability |
≥95% |
|||
|
Operating mode |
Full automatic control, semi-automatic control, manual control |
|||
|
Machine size (including the finished silo container) |
L*W*H：49*40*25m |
|||
|
The driving power and total weight |
Total installed capacity |
≈650kw |
||
|
Total weight |
280t |
|||
