Click image to view original image
Specification
- Model: DLN-24-5
- Cage wire quantity: 8/10/12/14/16/18/20/22/24
- Ring space: can be set at any value
- Cage outer diameter: 100-200mm
- Rail length: standard 7m, up to 10m can be customized
- Input voltage: 380V(2-phase) or customized
- Power frequency: 50/60Hz
- Designed max capacity of transformers: 80KVA
- Instant power in sync mode: 36KVA
- Instant power in async(time-sharing) mode: 18KVA
- Transformers: 2sets
- Air pressure: 0.6-0.8MPa
- Required ir flow: 300L/min
- Cooling method: natural cooling
- Weight: about 1000KG
Features
- Very high welding speed, e.g. for a 12-wire cage, one ring takes only 0.18s
- Automatic cage pulling, ring space can be set in the program through the user-friendly interface.
- The cage pulling carriage is equipped with bearings, runs on the rail with linear guides, it's smooth and precise
- Function of bad weld detection and auto re-welding
- Material selection, different welding parameters for mild steel, galvanized steel and stainless steel
- Auto compensation gives enough space to insert the ring when the ring distance is short
- Ring space precision is 0.1mm; cage pulling speed is 0.4m/s
- Rails and material shelf equipped and connected to the machine. The front end of the rail is adjustment-free. Good linearity can be achieved for wire cages
- Four air tanks, short air route inside the machine ensures quick response of the cylinders
- 25mm thick front plate resulted from one-time machining, firmly secure that the welding cylinders are on the same plane and perpendicular to the axes, thus the linearity of the cage can be ensured
- Stroke-adjustable cylinders increase welding speed, pre-pressing only takes 0.08s
- Equipped with powerful micro-computing unit
- Sync/Time-sharing mode can put two transformers work at the same time or one after another, secure good welding quality even when the power supply is not very sufficient
