U.S. RYCOM cable pipe cable pipe detector 8831

U.S. RYCOM cable pipeline detector 8831

8831 is a U.S. manufacturer of precision, rugged, reliable, portable instrument. It is designed to withstand many years a large number of field use. 8831 can be fired by 815Hz low frequency high power 3W. High-low frequency output signal can track the distance of maximum and crowded area of the signal radiation and coupling to a minimum. RYCOM company is a pioneer in the field of low-frequency locators, they always think that, for the most accurate positioning of the portfolio is to use low-frequency signal and direct connection method. As the low-frequency electromagnetic fields in fact limited to conductors, so the risk of interference is greatly reduced. In ideal conditions, the 8831 can track up to 25 miles away. Long distance in track, due to less use of transmitters, so the time and location and cost reduced. Just perform a quick step, can be tracked transmitter power and the resistance of the cable or pipe to match. Easy reading of the scale can display the correct signal matching. 8831 does not allow users in the field due to battery exhaustion while in trouble for 11 hours of continuous positioning. You can use rechargeable battery pack or portable battery pack power supply for the 8831. These two cell groups can be used interchangeably. 37 inches (0.97 meters) of full-function probe (the receiver probe) looks like a stick, very comfortable to use. No need to crouch in order to improve the sensitivity and accuracy. High sensitivity receivers of electromagnetic signals can be converted to the receiver's sound and visual output. You can use the receiver triangulation method is fast and accurate depth measurement. By high power 3W transmitter with 8831's combination of high sensitivity receivers, you can get the maximum signal distance. Probe by the receiver through underground conductors, electromagnetic probe current can be converted in two ways: the peak and zero values of sound tones, easy-to-read scale instructions. AM / FM / OFF switch may decide to listen to the audio way. Speaker of the AM or FM loud to soft and up and down pitch change, or use the OFF setting will sound completely abolished. When the 8831 when used in conjunction with the headphones, it will be around the traffic noise and other noise isolation out. Can pull the signal tone selector switch to 50-60Hz location on a power supply cable positioning. Use 50-60Hz position, without being connected transmitter. When using the receiver probe positioning a path, you can reveal the level of the region with the irregular signal. Without damage to the cable jacket on, with the user away from the transmitter, the signal will become weak. However, damage to the cable jacket, the soil current will be concentrated to the divergence in all directions. When the optional ground return probe attachment and the receiver is connected, the 8831 becomes a fault locator. Transmitter box has a compartment for storage, portable receivers, headphones, power lines, grounding rods and optional Flexicoupler. You can use a folding carrying case to bloom ground return probe and 37in. The receiver probe. RYCOM the 8831 cable, pipe and fault locator price than was expected with such a superior performance and accuracy of the equipment price is much lower.
The product range, quality, welcome old and new friends to inquire :010-59790467 Fax 010-58857467 Mobile: 18611070137 QQ: 1547157999 Website; www.yunfulong.com