Click image to view original image
HIPS 3d Printer Filament 1.75 / 3.0mm
1, Specifications :1.75&3.0
2, Manner and packing: use vacuum package, the net weight 1.0KG.
3, Density is small , good toughness.
4, HIPS is soft then ABS.
5, There is no smell.
6, Working temperature 200°C -270°C.
- Full compliance with RoHS regulation;
- High strength and good toughness;
- Made from virgin grade (raw white pallets), inclusion-free, does not block your extruder;
- The diameter stays stable and consistent;
- It loads and unloads perfectly with the printer;
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.
4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant inside of it.
Advantages: High strength,good toughness, impac tresistance,stable in performance
Disadvantages: Has a odor like buring the plastic when it is being printed.
