We can add drying insulation system according to the demands (silica gel or electric heating). It is applicable in damp ocean engineering.
The device saves time and materials, save efforts, efficient and environmental protection; it can be widely used in recovery and transmission of welding flux in domestic nuclear power, wind power, boiler, pipe and other cylinders. It can realize the recovery of flux in the smallest cylinder of 300MM.
MODEL |
VOLTAGE |
FLUX CAPACITY |
VACUUM PRESSURE |
HORIZONTAL RECOVERY DISTANCE |
VERTICAL RECOVERY DISTANCE |
VOLUME OF ABSORTING FLUX |
MOTOR POWER |
LT-HS100E2 |
380V |
50kg |
-0.02Mpa |
10-15m |
5-7m |
8-15kg/min |
3kw |
LT-HS150E2 |
380V |
50kg |
-0.04Mpa |
15-20m |
6-8m |
15-20kg/min |
5.5kw |
MODEL |
HEATING POWER |
AIR SOURCE |
HORIZONTAL TRANS VOLUME |
FLUX TRANS VOLUME |
NET WEIGHT |
DIMENSION(L*W*H) |
LT-HS100E2 |
0.4W/c㎡ |
0.4-0.6Mpa |
8-25m |
2-20kg/min |
150kg |
1100*500*1400mm |
LT-HS150E2 |
0.4W/c㎡ |
0.4-0.6Mpa |
8-25m |
2-20KG/min |
160kg |
1200*600*1500mm |