Click image to view original image
ABS Glow in The Dark 3d Printer Filament 1.75 / 3.0mm
1, Specifications:1.75&3.0.
2, Manner and packing: use vacuum package, the net weight 1.0KG.
3, Density is small, good elasticity, good toughness.
4, ABS is soft than PLA.
5, good performance of electroplating.
6, Working temperature 230°C -270°C
7, Variable Temperature ABS print strips change color temperature is 31 degrees
8, Glow in The Dark Blue when filament in Dark ,can emit blue light,Glow in The Dark Green when Filament in Dark ,can emit Green light.
1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it, use
vacuum package, every Tray into a small box, and the each 8 small box into a master carton.
2, Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the corresponding
carton35.8×35.8×22.5cm
2, Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding
carton 43.5×43.5×18cm
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Products are ready-made goods:
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind
material, and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to make sure that sure that each
batch of new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a
right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate
of wrong size, and this unqualified filament will be cut off and never use it.
4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a
desiccant inside of it.
