Plastic Blasting Media

Plastic Blasting Media (PBCM) is designed specifically for deflashing, coating removal, paint stripping, mold cleaning and surface preparation. Engineered for high performance, PBCM is clearly the leader when it comes to productivity and value. This is sometimes called Plastic Media, PMB (Plastic Media Blassting) or Plastic Abrasives

They are 6 kinds of Plastic Blasting Media available: MF, UF, NR, PCC, AC, PCG.

1. Melamine Formaldehyde
Type Sieve No (inch) (mm)
MF 12-16 12/16 0.066/0.047 1.70/1.18
MF 16-20 16/12 0.047/0.033 1.18/0.85
MF 20-30 20/30 0.033/0.023 0.85/0.60
MF 30-40 30/40 0.023/0.016 0.60/0.42
MF 40-60 40/60 0.016/0.010 0.42/0.25
MF 60-80 60/80 0.010/0.007 0.25/0.18

Application:
A). Used for deflashing discrete products and other components in electronics industries and die casting.
B). For cleaning mold when it has stain in rubber product molding.
C). For Paint Stripping.

2. Urea Formaldehyde
Type Sieve No (inch) (mm)
UF 12-16 12/16 0.066/0.047 1.70/1.18
UF 16-20 16/12 0.047/0.033 1.18/0.85
UF 20-30 20/30 0.033/0.023 0.85/0.60
UF 30-40 30/40 0.023/0.016 0.60/0.42
UF 40-60 40/60 0.016/0.010 0.42/0.25
UF 60-80 60/80 0.010/0.007 0.25/0.18

Application:
A). Used for deflashing discrete products and other components in electronics industries.
B). For cleaning mold when it has stain in rubber product molding.
C). For Paint Stripping.

3. Polycarbonate Cryogenic
Type L x D (INCH) L x D(mm)
PCC-80 0.080 x 0.080 2.00 x 2.00
PCC-60 0.060 x 0.060 1.50 x 1.50
PCC-45 0.045 x 0.045 1.14 x 1.14
PCC-38 0.038 x 0.038 1.00 x 1.00
PCC-30 0.030 x 0.030 0.75 x 0.75
PCC-20 0.020 x 0.020 0.50 x 0.50
PCC-15 0.015 x 0.015 0.38 x 0.38

Application: Used for deflashing in rubber product molding, engineering plastic molding & die casting if they have cryogenic deflashing machine.

4. Nylon-Red (Polyamide)
Type L x W x H (INCH) L x W x H(mm)
NR-80 0.080 x 0.080 x 0.080 2.00 x 2.00 x 2.00
NR-60 0.060 x 0.060 x 0.060 1.50 x 1.50 x 1.50
NR-45 0.045 x 0.045 x 0.045 1.14 x 1.14 x 1.14
NR-38 0.038 x 0.038 x 0.038 1.00 x 1.00 x 1.00
NR-30 0.030 x 0.030 x 0.030 0.75 x 0.75 x 0.75
NR-20 0.020 x 0.020 x 0.020 0.50 x 0.50 x 0.50

Application: Used for ambient deflashing in engineering plastic molding.

5. Acrylic
Type Sieve No (inch) (mm)
AC 12-16 12/16 0.066/0.047 1.70/1.18
AC 16-20 16/12 0.047/0.033 1.18/0.85
AC 20-30 20/30 0.033/0.023 0.85/0.60
AC 30-40 30/40 0.023/0.016 0.60/0.42
AC 40-60 40/60 0.016/0.010 0.42/0.25
AC 60-80 60/80 0.010/0.007 0.25/0.18

Application: Used for blast cleaning depending on product that requires blasting.

6. Poly Allyl Di-Glycol Carbonate
Type Sieve No (inch) (mm)
PCG 12-16 12/16 0.066/0.047 1.70/1.18
PCG 16-20 16/12 0.047/0.033 1.18/0.85
PCG 20-30 20/30 0.033/0.023 0.85/0.60
PCG 30-40 30/40 0.023/0.016 0.60/0.42
PCG 40-60 40/60 0.016/0.010 0.42/0.25
PCG 60-80 60/80 0.010/0.007 0.25/0.18

Application: Used for blast cleaning depending on product that requires blasting.