Click image to view original image
1085A sand blast machine is specially designed for plastic surface decoration treatment and renovating. It consists of a large cabinet enclosure 1000x850x800mm, two grade of cyclone reclaimer and reverse pulse cartridge dust-collector, using ceramic bead efficient as blast media to remove 100% weld lines scratch; Watermark, burr, easy using, low maintenance.
Product Feature:
1, Remove watermark, weldmark scartch, and at the same time brighten matte to achieve the best beauty effectiveness, to obtain soft texture of gas, uniform matte effect;
2, without change workpiece color, material;
3, increasing finishing;
4, does not change the printed font pattern.
Features:
1.24" long rubber gloves resist wear and protect operator.
2. Internal light for good visibility.
3. Safety interlocks interrupt blasting if the door is opened.
4. Steel plate welded construction.
5. Glass view window, exchangeable free tool.
6. Pressure regulator, gauge, and electric switch mounted within easy reach.
7. Foot pedal switch for activating blasting.
Main cabinet: 1100 x 1350 x 2300 mm
Blasting room: 1000 x 850 x 800 mm
Side door opening: Left door and right door
Exhauster: 370W
Blasting gun: One with Boron carbide dia. 8mm
Dust collector: Reverse pulse cartridge.
Compressed air source: 0.5-8 bar, 0.6 m3/min dry clean
Compressed air
Options:
1. Manual turntable
2. Automatic turntable
Application:
Apply to the plastic surface beauty treatment; Cosmetic renovation of the old plastic componments, renovated appearance as good as the new ones, improve glossy degree.
