Click image to view original image
Max. working width
1000 mm
Max. machine working speed
150 m/min
Max. printing speed
120 m/min(Forme :Φ120mm—Φ288mm )
Tension controlled mode
tension swing arm +tension sensor +variable-frequency motor
Tension controlled range
3-30Kg/ width overall
Tension controlled precision
error≦0.2kg
Total power
About 70kw( transmission:32kw,UV light and others:38kw)
| Printing PET | 18~35um |
| OPP,BOPP | 28~35um |
Configuration
unwind with odd station , control with photoelectric edge guide, active unwind with variable-frequency motor
Specification & Configure
Max. width of unwind
1000mm
Max. diameter of unwind
Φ800mm
Unwind motor
4kw vector frequency-converted motor one set
Motor driver
Askawa 5.5kw one set
unwinding shaft
Φ3"& Φ6” air shaft with aluminium alloy one roll for each
Unwind automatic edge guide system
photoelectric control ,DC servo motor One set
corrective range:100mm
static discharger
Imported carbon brush one
| Configuration | Double roller counter-emboss , vector frequency-converted motor |
| Specification & Configure | Steel roller: Φ160mm one roll Rubber roller:Φ140mm ,anti-static one roll Motor: 2.2kw vector frequency-converted motor one roll Motor drive: Asakawa 2.2kw one set Embossed roller controlled by cylinder ,pressure can be adjusted separately Tension control: mitsubishi ,Japan one set |
Configuration
Loading without axis, transmission with mechanical axis, vector frequency-converted motor
Specification
Motor :5.5kw made by Rexnord one set
Motor drive: Asakawa 5.5kw one set
Printing roller:due to client’s product requirment
Diameter of Printing Shim :Φ120mm-Φ288mm
Length of Shim axially:650mm-950mm
Subassembly of printing roller
Printing force : Max.:500Kgs/width overoll
Pressure cylinder: Φ80 cylinder(Airtac),cylinder recover, automatic close & open ,pressure can be adjusted.
Printing rubber roller: Φ150(hardness shore:75o) ,
Ethylene Propylene Diene Monomer
Guided roller
Φ90 aluminum alloy roller, anodizing surface, dynamic balance precision≦2g
Knife unit
Knife rest: move swing angle pre & post lifting, full function
Knife: grinding blade made by Italy
Pressure: double cylinder , Φ50X25(Airtac),pressure can be adjusted
reciprocating motion: offset swing rod
Circular gluesupplying system Ink tank: stainless steel, manual lifting
pre-drying oven
Length: about 1.4m, blower 0.55kw, exhaust fan 0.75kw one group
| Configuration | Double roller counter-emboss , vector frequency-converted motor Motor : 2.2kw vector frequency-converted motor one set Motor drive: Askawa 2.2kw frequency-converter one set |
| Cooling roller | Mirror steel roller , imperative cooling with recycle water Diameter:Φ345mm Length:1000m |
| Guided roller | Φ90 aluminum alloy roller, anodizing surface, dynamic balance precision≦2g |
| Tension controller | mitsubishi ,Japan one set |
| Configuration | rewind with odd station , active rewind with variable-frequency motor |
| Specification & Configure | Max. width of rewind: 1000mm Max. diameter of rewind: Φ800mm Unwind motor 4kw vector frequency-converted motor one set Motor driver : Askawa 616G7 5.5kw one set rewinding shaft: Φ3"& Φ6” air shaft with aluminium alloy one roll for each Tension control : mitsubishi ,Japan one set Rewind stick roller one set |
