Office internal sliding doors , Auto sliding Door operator Bea infrared motion sensor

 

 

Intelligence,

 

a. controlled by the microcomputer digital chips ,giving the control unit multiple programmable modes including provision to interface with builidng security system, monitoring the doors position status,built-in UPS,etc

b. Wide operational parameter setting like speed,hold-on time,power,etc

 

 

Safety,

 

 

a. Active 8 combination sensor to activate door and prevent from clamping

b. Auto-reversing when confronting with obstacle.

c. UPS when power fails to provide escaping passage

d. The microcontroller also provide the interface for alarming system ,safety system ,etc

e. Fuse protection at 1A, 250V

f. Protection when working temperature is over setting value

 

 

Reliability,

 

a. imported Microchips MCU to control the door working. 24V,60W, DC bruthless motor have big power to hold 150kg panels, work a long time and noise is 50db to 60db.

b. With the help of advanced synchronous belt and perfect design of power supply circuit , the door moves very stably.

c. Track and anti-derail rubber on the hanger roller to protect from derailing. Our this techniques is veyr mature. and can promise it cant derail.

 

 

Specification,

 

Door model	Single			Bi-Parting
Door width	700-1300mm			600mm-1250mmn
Door weight	150kg			150kg x 2
Opening speed	15cm-50cm/s			15cm-45cm/s
Clsosing speed	10cm-45cm/s			10cm-43cm/s
Hold on time:	0-9s
Motor	brushless 24 volt DC,60W ,high torque 3000r/min
Microcontroller	PLC techniques and 16 bit MCU, Visialbe adjustment screen
Power supply	80V-250V,60Hz/50Hz
Profile size	4200mm(L)x 150mm(H)x 110mm(W)

 

 

 

Components

 

Retro-fit kit
1	Motor & Gearbox	1pcs	China-made 24V,55W ,DC bruthless motor
2	Microcontroller	1pc	8 bit MICROCHIP chip
3	Radar	2pcs	Bea combination sensor
4	Learning code remote controller	1set	Hold-open,lock,exit only, half-open
5	Carriage	4pcs	2 running wheel
6	Tooth belt	1pc	7m, fiberglass tensile elements, nylon surface
7	Belt clamp	2pcs
8	Idle pulley	1pc	Aluminum alloy
9	Stopper	2pcs	Aluminum alloy
10	Connection termial	1pc	For 220V power ,and outside sensor connection
Profile
1	Track	1pc	3mm thickenss, Anodize, height 125mm, depth 100mm,length 4200mm
2	Cover	1pc	170mm height,anodized
Options
1
2	Electro-mechanical lock	1set	12V,time delay
3	Emergency battery	1set	12V,7Ah,contiunously working half an hours
4	Control panels	1set	LCD display, key swtich,5 program adjust
5	Floor guide	2pcs	For frame and frameless door
6	Glass clamp	2pcs	1m length, fit to 10mm,12mm glass

 

Sectional Drawing

 

 

Bea Safety and Activation Combination Sensor,

 

 

Factory,

 

 

 

...