Click image to view original image
Design target:
Due to our design, this machine can work three function:
1. Lamination and re-lamination: PET Film + Paper , finish paper can be wet with water steam
2. coating: Film adhesive/ color coating, dry coating weight can be from 2gsm to 30 gsm
BASIC SPECIFICATION
|
1. Maximum web width:
2. Maximum machine speed:
3. Maximum laminating speed:
4. Tension control:
5. Tension control scope:
6. Maximum web diameter:
7. Web rectification:
8. Unwind and rewind mechanism:
9. Laminating pressure:
10. Web splicing:
11. Paper core of web and assembly form:
12. Dry form:
The length of dry tunnel:
13. Minimum pressure of air source:
14. Minimum pressure of water source:
15. Laminating layers;
16. Overall motor power:
17. The working platform:
18. The machine dimension: (LxWxH)
19. The machine weight:
|
1000mm
180m/min
160m/min
8 motors in closed-loop control, 4-section tension dancer roller system
3kg-25kg/full width
Coating Filmф800mm
Paper: 1000mm
Auto edge position control(EPC)
Double un-winder and double re-winder
2300kg/full width
Web automatic splicing at high speed without stopping laminator.
3″airshaft. Additional 5 pieces of 6″Air Chuck.
Closed type dry tunnel in five sections, (gas stove and pipe-line to be prepared by consumer).
Approximate 15000mm.
0.6MPa
0.2Mpa
Two layers (once)
51kW
Height 2000mm, length 15000mm, width 500mm.
About 22000mm×4990mm×3350mm
Approximate 23 tons
|
Lamination material
Base material:
|
1)OPP/BOPP
2)PET
3)PVC
|
15-60μm
12-200μm
40-120μm
|
The second materials
|
1)Paper
|
60~280gsm
|
Coating material:
|
OPP/BOPP
PET
PVC
Paper
|
15-60μm
12-200μm
40-120μm
60~280gsm
|
