Click image to view original image
Low Pressure Bimetallic Steam Trap
Quick Details:
Temperature: 425
Working Media: Steam, Condensate Water
End Connection: Flange, Screw & Socket Welded
Adjustable Discharging Temp
Specifications:
Thermostatic Steam Traps
Tight Shut-off With SCCV System
Adjustable Discharging Temp
Water Seal No Steam Loss
Installed In Any Direction
Design Pressure: PN25
Preesure: 0.01 - 1.6 Mpa
Material: WCB & A105
Temperature: 425
Working Media: Steam, Condensate Water
End Connection: Flange, Screw & Socket Welded
Bimetallic Steam Trap / Thermostatic Steam Trap
TB11:
- 1. Tight shut-off and long service life by using SCCV system.
- 2. Efficient in energy saving---adjustable discharging temperature And effectively using the sensible heat of hot condensate.
- 3. Discharging temperature can be adjusted when the pipe net is in Operation. Can be installed in any direction.
- 4. Hot condensate exists just before the trap, forming a tight water Seal, which ensures no steam loss.
- 5. Withstands water hammer with outstanding performance of air Venting.
- 6. Operating without noise, benefiting for environmental protection.
- 7. Full open at the beginning of steam supplying, discharging cold Condensate and air rapidly, which ensures quick start-up.
-
8. Stainless steel internals are resistant to corrosion and cavitation. Small in size and light in weight, easy maintenance.
Application:
This steam trap is suitable for steam main pipe, steam tracer, radiator, low temperature heating trough, jacketed kettle and heating system etc...
Note:
This steam traps Insulation is not recommended for pipe section 1 meter before the trap and the trap itself.
