Click image to view original image
2 PfG 1169/08.2007 covers the single core flexible cable(wires) used in DC sides of photovoltaic system which max.permissible DC voltage is 1.8v(line to line ,non ground system). The product is applicable to the environment which safety degree is under Class II ,and it can be parallel used.
CABLE STANDAEDS
The product is manufactured according to the 2 PfG 1169/08.2007 .The Requirement of Photovoltaic Cable' standard.And our product own the TUV Rheinland Certificate.Photovoltaic Cable
The electrical and dimensional properties of this product are measured by the technical and Quality Assurance department at the JiangNan Cables Laboratory.Cable performance in respect of conductor
resistance,construction quality,dimensional consistency,and other
parameters are verified to published atandards and approved.
CHARACTERISTICS
Rated Voltage:
AC 0.6/1kv DC:1.8KV
Conductor:
Number of conductor:1
Condector Type: class5 according to EN60228
cross- sectional Area:1-35mm2
Insulation&sheath
halgogen free material
Operating Temperature:-40-90℃
Max. short circuit temperature: +200℃;
Max. Conductor temperature:120℃;
Service life shall not be less than 25 years;
Ozone resistant and acid-resistant;
Good insulation resistance;
Good performance of cols bend and cold winding;
Low-smoke;
Environmentally friendly,conforms to RoHS compliant.
Ambient Temperature Of Installation
Not less than -20℃
Permissible Bending Radius
4 times of cable diameter
Located in China,if you cooperated with us,you do not worry about anything else,all the problem we can solve it.
