Click image to view original image
* It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTM and BS. It can be used both in the laboratory and in harsh field conditions.
* The F probes measure the thickness of non-magnetic materials (e.g. paint,plastic, porcelain enamel, copper, zinc,aluminum , chrome etc.) on magneticmaterials (e.g. iron, nickel etc.) . often used to measure the thickness of galvanizing layer, lacquer layer,porcelain enamel layer, phosphidelayer, copper tile, aluminum tile, somealloy tile, paper etc.
* The N probes measure the thickness of non-magneticcoatings on non-magneticmetals. IT is used on anodizing, varnish, paint, enamel,plastic coatings, powder, etc. appliedto aluminum, brass, non-magneticstainless steel, etc.
* Automatic substrate recognition.
* Manual or automatic shut down.
* Two measurement mode: Single and Continuous
* Wide measuring range and high resolution
* Metric/Imperial conversion.
* Digital backlit display gives exact reading with no guessing or errors.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Can store 99 groups of measurements.
* Statistics is available.
2.SPECIFICATIONS
Display: 4 digits LCD, backlit
Range: 0~1250 micron /0~50mil
(Other ranges can be specified)
Min.radius work piece: F: Convex 1.5milimeter/Concave 25milimeter
N: Convex 3milimeter/ Concave 50milimeter
Min. measuring area: 6milimeter
Min.Sample thickness: 0.3milimeter
Resolution: 0.1 micron (0~99.9micron);
1micron (over 100micron)
Accuracy: about 1 to 3percent n or 2.5 micron or 0.1mil
(Whichever is the greater)
PC interface: with RS-232C interface
Power supply: 2x1.5 AAA (UM-4) battery
Operating condition: Temp. 0 to 50 Celsius degree.
Humidity: minus 95 percent.
Size: 126x65x35 mm; 5.0x2.6x1.6 inch
Weight: about 81gram (not including batteries)
Standard accessories:
Carrying case ...................1 pc.
Operation manual ............ 1 pc.
F probe in built .................1 pc.
NF probe in built...............1 pc.
Calibration foils ..............1set.
Substrate (Iron) ................1 pc.
Substrate (Aluminium)......1 pc.
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth interface
