Click image to view original image
CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the,carbonated drink bottle, pesticide oil bottle cosmetics,wide-mouth bottle etc.
1) Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2) The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3)The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4) The machine can be operated in the step-by-step mode and the semi-auto mode.
5) The machine is small with low investment, easy and safe to operate .
Parameters of the machine
|
TYPE |
ITEM |
MEASUREMENT |
CM-8Y |
|
END PRODUCT |
Material |
PET/PP/PE |
|
|
Volume |
L |
0.1-2L |
|
|
Theoretical output |
pcs/h |
1200-1600pcs/h |
|
|
Neck Diameter |
mm |
15-38 |
|
|
Body Diameter |
mm |
20-100 |
|
|
MOULD PLATE |
Max.mould thickness |
mm |
180mm |
|
Max.Valid area |
mm |
350*380 |
|
|
Cavity |
2 |
||
|
AUXILIARY |
HP Air compressor |
M3/Mpa KW |
0.7m3/min 3.0Mpa 2sets |
|
Air cooling dryer |
M3/Mpa |
1.0m3/min 3.0Mpa 1set |
|
|
Precision Air filters |
2 pcs |
||
|
MAIN MACHINE ELECTRICITY |
Total Power |
KW |
17.50 |
|
Voltage/Frequency |
V/HZ |
220-380/50-60 |
|
|
MACHINE SIZE AND WEIGHT |
Main Machine dimension |
L*W*H |
1.60*0.60*1.61m |
|
Infrared Heater |
L*W*H |
1.87*0.63*1.45m |
|
|
Main machine weight |
T |
0.5 |
|
|
Preform Unscrambler weight |
T |
0.25 |
