Click image to view original image
Products:
SinoV-810P is a 8 port FXS/FXO analog Asterisk PCI card. The PCI plug is based on PCI2.2. User could choose any of combinations of FXO_200, FXS_200 or FSO_200(intelligence failover switch module) modules according to their requirements.
Main Features:
* High security: It adopt tertiary thunder preventing technology, can prevent the thunder and lightning from striking effectively
* 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
* World Wide Usable: Configurable line interface to meet global telephone line interface requirements.
* The high stability firmware is exported / imported with DMA data exchange, so it accelerated and reduced CPU load greatly. Under the environment of the same hardware, CPU rate of utilization is equal to CPU rate of utilization of using 8 port analog card.
* Support all functions of Asterisk PBX system needed.
* Humanization is designed: The module socket that should be nipped is all adopted and stuck to one slice of sockets, can prevent stabing users finger effectively .
New function:
Easy to install , this card can use all same as DIGIUM company TDM800P
if use Trixbox/Elastix/Freeiris2 IPPBX software, can automatic recognition our cards ,not neet to install any drivers.
Product Spotlight
SinoV-810P is a new analog card. It can be used for connecting analog telephones and analog POTS lines through a PC. It delivers the superior voice quality on both FXO and FXS interfaces in all 8 ports.
· Adjustable Interrupt Routing Design
· Interrupts Frequency Adjustment
· Up to 8 Simultaneous PSTN Calls (Per PCI Slot)
· Compatible with All Commercially Available Motherboards
· 3-Month “No Question Asked” Return Policy
· Lifetime Warranty
. 2U class high
Overview
SINOV-800B is a new generation analog card with interchangeable FXS_200 and FXO_200 modules. It can eliminate the requirement for separate channel banks or access gateways.
The SINOV-800B contains 8 module banks. Each bank supports one analog interface. The module banks may be filled with up to FXO_200 or FXS_200 modules enabling the creation of any combination of ports. Scaling of an analog card solution is accomplished by simply adding additional cards.
SINOV-800P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
Target Applications
· Small Office Home Office (SOHO) applications
· Small and Medium Business (SMB) applications
· Gateway Termination to analog telephones/lines
Services and Features
· Caller ID and Call Waiting Caller ID
· ADSI Telephones
· Loopstart Signaling Support
Technical Specifications
· Up to 8 ports through a combination of FXS_100 and FXO_100 modules
· Full-length analog card
· Up to 1 quad FXS or FXO modules
· RJ45 connector
· 32-bit 33MHz PCI and fully PCI 2.3 compliant, compatible with all commercially available motherboards, and proper sharing of PCI interrupts
· 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
· Autosense compatibility with 5 V and 3.3 V PCI busses compatible
· Power: 8.21W Minimum, 88.24W Maximum at 3.3 V or 5 V.
· Operation temperature: 0°C to 50 °C
· Storage temperature: -40°C to 125°C
Operating Systems
· Linux (all versions, releases and distributions from 1.0 up)
Minimum Hardware Requirement
· 800-Mhz Pentium III
· 128MB RAM
· Available PCI Slot
Size and Weight:
Size: (L*W*H): 220*107*12MM
Weight: 300g
