7.5KW G.I or Painted G.I Steel Forming Machines 0.4mm-0.8mm Thickness

 7.5KW G.I or Painted G.I Steel Forming Machines 0.4mm-0.8mm Thickness

Technical parameters

1. Matching material: G.I or painted G.I

2. Material thickness range: 0.4-0.8mm

3. Main motor power: 7.5KW motor with cycloidal pin wheel reducer

4. Forming speed: 8-12m/min

5. Hydraulic station power: 3.0KW                

6. Quantity of stands: about 20 rollers for YX35-200-1000                                   

7. Shaft Material and diameter: ￠70mm, material is 40CR

8.Material Of The Stations: Guide rail style 

9.Tolerance: 3m+-1.5mm

10.Way Of Drive: 1.0 inch single chain             

11. Controlling system: PLC

12. Total weight: about  15Tons

13. Voltage: 380V/ 3phase/ 50 Hz

14.Size of the machine: L*W*H  9  m*2.0m*1.4m

15.Material of forming rollers: Gcr 15, coated with chromed treatment

16.Material of cutter blade: Cr 12 mould steel with quenched treatment 58-62℃

Main composition of the machine

The machinery line consists of 7.0 tons hydraulic de-coiler, material guiding, forming roller system, hydraulic cutting system ,run-out table, control cabinet with PLC

Working Flow

Hydraulic de-coiling ---guiding- -roll forming- length sizing –cutting the panel-panels to the collecting platform— Finish

Packing List details

7 tons hydraulic  de-coiler                            x1 set    

Main roll forming machine(double layer)       x1 set  

Control box                                                  x1 set

Hydraulic station                                          x1 set

Hydraulic cutting system                             x1 set

Run-out table                                             x2 sets

Cutting mould                                           x2sets

Tools and components                             x1 set

Cutting:

(1)    Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. 
(2)    Material of blade: GCR12with heat treatment 
(3)    Length measuring: Automatic length measuring 
(4)    Tolerance of length: +/- 1.5mm

Control Box:  Brand Panasonic

(1)    Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2)    Automatic length measurement: 
(3)    Automatic quantity measurement
(4)    Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)    Length inaccuracy can be amended easily
(6).    Control panel: Button-type switch and touch screen
(7)    Unit of length: millimeter (switched on the control panel)