Kaneko solenoid valve 4 way M15DG SERIES

Coated with hard anodized aluminum, inner sliding parts can slide very easily and work with no oil lubrication during operation, without sticking and slipping, and are excellent in wear resistance.

Compact and light since main parts are made of aluminum alloy.

AC and DC coils are easy to replac because both are contained in the same casing.

Subjected to anti-corrosion treatment with hard anodized aluminum very high in corrosion resistance.

Explosion-proof type valves certified by the Ministry of Labor.

The main valve is of a balance piston type whose switching action is done by a control piston without need for a spring. Therefore, no such malfunction as is caused by spring action will not occur even after standing for a long time.

Provided with a manual button for operation check or testing.

Reliable operation at a minimum operating pressure of 0.1 MPa because no air loss is produced.

Also available as three-way valves if three out of the five ports are selected.

Standard specification

FLUID CLEAN AIR

FLUID TEMPERATURE -20 ～ 60℃

AMBIENT TEMPERATURE -20 ～ 60℃

DUTY CYCLE 100% ConTINUOUSLY RATED

OPERATING VOLTAGE RANGE +10，-15％

WORKING PRESSURE 0.1 ～ 0.99MPa

Cv. FLOW FACTOR 0.87

M15DG GENERAL PURPOSE TYPE

M15DG-8～10 GENERAL PURPOSE TYPE(MANUAL OPERATION)

M15DG EXPLOSION-PROOF TYPE

M15DG-8～10 EXPLOSION-PROOF TYPE(MANUAL OPERATION)

M15DG DUST EXPLOSION-PROOF TYPE

M15G-8～10 DUST EXPLOSION-PROOF TYPE(MANUAL OPERATION)

MB15G-8-DE12PU

M15G-10-DE 12PU

M15G-10N-AE12PU

M15G-8-AE12PU

M15G-10-AE12PU

MB15G-8N-DE12PU-24

MB15DG-8N-DE12PRS-M

MOODU-8N-DE12PRS-01-M

M15DG-8N-DE12PRS-M-03

MB15G-8-DE12PU-24

MB15DG-8-DE12PRS-M

MOODU-8-DE12PRS-01-M

M15DG-8-DE12PRS-M-03

M15G-8-D12PG-TF

M15G-8-AE12PU-220

M15DG-10-AE12PRS-M