Click image to view original image
Can be used even with a pressure differential of zero as main and pilot valves are directly connected to each other.
Pressure losses are small as nominal size is equal to seat size.
Products certified for high-pressure gas services are also available.
Designed so that the valve after once actuated does not change its state unless it is manually reset.
Precautions
Install the valve with the solenoid upward with respect to horizontal piping (permissible angle of inclination is within 30 degrees to the vertical).
Limited flow directions (align with the arrow indicating the flow direction).
Limited flow directions (align with the arrow indicating the flow direction).
Remove air through vent valve in cases where the working fluid is a liquid.
Do not paint external moving parts.
Standard specification
FLUID
GAS , LIQUID , STEAM
WORKING PRESSURE
See below
FLUID TEMPERATURE
As for working temperature you can selec any KANEKO model no. that will have different inner construction. The using temperature is available form 5deg.C to 200deg.C.
AMBIENT TEMPERATURE
－20℃ ～ 40℃(But to be used within the range of fluid dose not frozen.)
VISCOSITY OF FLUID 250cst or lose
DUTY CYCLE 100% ConTINUOUSLY RATED
OPERATING VOLTAGE RANGE ＋10％，－15％
M31 – 15 ～ 32 – A44、AE44-BS TYPE
M31 – 15 ～ 32 – D44-BS TYPE
NOMINAL DIAMETER
V:FUNCTION RC/TC
V:FUNCTION RD/TD
M31 – 15 ～ 32 – DE44-BS TYPE
