Click image to view original image
LHSX-1 gantry CNC underwater plasma cutting machine (price: 25 yuan / sets from the sale)
Contact: Mr. Tang 13207158947 027-59841986
Advantages:
* Plasma cutting process will generate a lot of cutting gas and plasma arc light produced a dazzling, underwater plasma cutting can effectively eliminate the toxic fumes generated by cutting and plasma arc to the human eye injury *
works:
Underwater plasma cutting dust, there is a water level can be cut off and landing platform, when the intake valve began to open the fan cutting balloon inflatable water bed, the water level increased rapidly flooded when the water just to live to close the pneumatic valve plate, the water level stops moving, cutting, generated when all the smoke and arc absorbed by water. When the cut end of the valve open, the water level dropped deflated balloon to mark the operator and cutting, removal of such dust is the best way to dust a way, but due to the impact of water cutting speed, cutting ability, surface finish than dry cutting has decreased in varying degrees, the same cutting power consumption when the thickness of the plate can be higher than dry cutting about 15%, water bed manufacturing cost is relatively high.
Products:
I produced the "gantry CNC underwater plasma cutting machine" horizontal span of a 3m-10m specifications (effective cutting width by 0.8m), the length of the longitudinal rail configuration according to user requirements. Are driven by bilateral, multi-configuration according to user requirements to support the plasma torch and automatic adjusting system can also be configured as CNC cutting and CNC dry dual-use underwater cutting.
main configuration:
1, control system: Beijing Star micro-step system, or American Treasure system.
2, servo drives: Matsushita-made stepper motor or servo motor.
3, the reducer: Germany NEUGART precision planetary reducer.
4, beam trolley moving track: ABBA Linear Rolling Guide
Taiwan
5, plasma power: You can select any of the above can be achieved 100A underwater plasma cutting machine plasma power supply (domestic, import optional)
6, an increase in device: Domestic independent arc voltage automatically, or the U.S. Treasure to increase with the initial positioning of the arc voltage to increase the device automatically.
7, open the cable transmission of plastic construction towline.
The main technical parameters of the machine :
1, the horizontal span: 4000mm (effective cutting length of 3200mm, can be increased or decreased according to user requirements)
2, the vertical track length: 6000mm (effective cutting length of 4800mm, can be increased or decreased according to user requirements, the unit length is 3000mm / Day)
3, the maximum machine speed: 4500mm/min
4, take the bit precision:
