Module Characteristics:
• 30 optic zoom, 12X digital zoom
• Support auto-iris, auto focus,AWB,BLC,WDR
• Lens F=4.3mm-129mm
• Support min. Illumination, 0.02Lux/F1.6(color),
0.002Lux/F1.6(black & white)
0 Lux with IR
• Resolution 1080p/30,1080p/25,720P/30
720p/25, 720p/60, 720p/50.
Laser Characteristics:
• Min. Illumination 0Lux
• Using synchronous focus system, low power consumption, low temp, Laser night vision will be over 300m
• Laser lamp & ratio distance matching algorithm, is based on distance & ratio to adjust brightness and angle of this lamp,making the image to achieve the ideal state
• Built-in heat treatment device, which can reduce the temp of dome inside to avoid being fog
• Constant current circuit design, laser lamp life 50000 hours.
PTZ Characteristics:
• Using high quality CMOS sensor, image clear, support max.19201080@30fps
• Special vehicle design with high-strength aluminum alloy housing
• Double visor, wiper function
• Support RS485 remote control
• Precise motor drive, sensitive reaction, smooth running, precision error less than 0.1 degree,no image shaking under any speed
• Support PAL/NTSC, which can be suitable for most of areas
• Support OSD menu & operating reminders, clear user interface, easy to operate
• Support power-off memory, PTZ & Lens can return former state after power-on again
• IP66 weather protection grade
• Pan 360°continuous rotation, tilt(+90°--90°) no dead-angle, auto-flip
• Horizontal speed: 0.1° -100°/s,Vertical speed:0.1° -80°/s
• Support 128 presets, 1 self-learning track, 4 scanning tracks
• Support 6 programmable tracks, for each track, max. 16 presets added
• Support ZAP function, rotation speed can be automatically adjusted as lens zoom
• Support idle functions,preset/figure/programmable/automatic scanning, can automatically call in a specified time of idle state(including a idle state after power on)
• Support alarm function, 7x in, 2x out (optional).
Applications:
This series of vehicle PTZ can be widely applied to police car, military, communications, command,duty, etc.installed on vehicles (fire trucks, police cars, communication command vehicles, trains, etc., and other special purpose vehicle monitoring, the top carrier installation), can be used for criminal or secret investigation , forensics, emergency rescue, site investigation, construction operations, incident handling, emergency repairs, such as lighting conditions are poor environment.
Model:
FG-TC200SDI-06LA: full-HD camera 18X
FG-TC200SDI-06LB: SONYFCB-EH6300 20
FG-TC200SDI-06LG: SONYFCB-EH6500 30
FG-TC200SDI-06LH: SONYFCB-EV7500 30
Specifications:
Specifications:
Module
|
Image sensor
|
1/2.8 inch Sony Exmor® CMOS sensor
|
Effective pixels
|
2.0 Megapixels
|
|
Zoom
|
30 optic zoom , 12X digital zoom
|
|
Min. Illumination
|
0.35lux(F1.6AGC on 1/30s),0.002lux black & white
|
|
WB
|
Auto / Auto Tracking / Indoor / Outdoor / Outdoor Auto / sodium mode / one-touch / Manual
|
|
S/N ratio
|
>50 dB
|
|
WDR
|
Auto / Manual (Off / On)
|
|
Definition
|
1080p/30, 1080p/25, 720p/60, 720p/50, 720p/30, 720p/25
|
|
Focus
|
Auto, manual
|
|
Day/Night mode
|
Auto ICR
|
|
DNR
|
Support 3D DNR
|
|
Video Enhancement
|
AGC,BLC,AE,WB,Electronic shutter,mirror,DNR,Slow snapshots, color enhancement
|
|
Privacy masking
|
Support
|
|
Shutter speed
|
1/1 to 1/10000 sec
|
|
AGC
|
Auto/Manual (–3 dB to +28 dB, 16 steps)
|
|
Lens
|
Lens
|
F=4.3mm -129.0mm
|
Aperture range
|
F1.6-F4.7
|
|
View angle
|
63.7°(Wide)- 2.3°(Tele)
|
|
Laser
|
Laser range
|
Over 300m
|
Laser angle
|
Adjustable by focus
|
|
Laser control
|
In sync with module
|
|
PTZ
|
PTZ range
|
H: 360° , 0.08° to 100° /s V: 90°, 0.08° to 80° /s
|
PTZ protocol
|
Multiple protocols, RS485
|
|
Power-off memory
|
Support
|
|
Idle action
|
Support
|
|
Preset
|
128 presets,6 programmable tracks,3scanning tracks,1 self-learning track
|
|
Night vision
|
300m
|
|
Alarm in/out
|
4x in, 1x out(optional)
|
|
Video output
|
BNC(HD SDI)
|
|
General
|
Protection grade
|
IP66
|
Work temp
|
-40°C to 60°C , 0~95% humidity(no condense)
|
|
Size
|
300 x 294 x 224mm
|
|
Power supply
|
DC12V
|
|
Menu
|
OSD
|
|
Installation
|
Wall,base
|